QUICK SENSE INNOVATIONS: 9560248290(Customer care) Use:Home, Office, Shops, Hospitals, Hotelas, Bathroom, Corridor, Step, Parking area & etc QUALITY CONTROL STANDARDS: Operating Volt: AC 220-250V 50Hz-60Hz. Load power: Upto 300/1200W MaxAmbient Light: 3-2000 (Adjuestable)Load type: Incandescent lamp, LED light, CLF, fans, etcDetecting distance: 10~12 Mtrs(Dept temp) Detecting Angle: 180 Degree. Installtion Hight: 2.2-4 Mtr Motion Detetion Speed: 0.6~1m/sPower Cusumption:0.1W (static) & 0.4(Work)Working Humidity: less than 93%RHDelay: 10 Seconds -7 Minutes (Adjustable) PRODUCT INSTALLATION:1.Keep Sensor unit 1.6 Mtr higher from the ground level.2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.3. On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.PACKAGE INCLUDES:1 x Infrared Switch Board1 x Installation Manual 2 x Mounting Screw Bill Best Technical Support after Selling.
P**A
Poor
It was not what I expected for a motion sensor to work like. As per the instruction I had fixed it on the wall. But initially it was activated when I moved fingers near to the unit. Later adjusted the angle of the sensor to sense any movement infront of the unit from a distance of 2mtrs. Able to serve when the motion was fast. Was not able to detect anything slow in motion. Tried to adjust various angles to find out the correct position for sensor but I failed. The response was not at all good. Hence was totally disappointed with it. I had also contacted the c care but their response was neither encouraging. Sadly I had to return it.
V**N
Very useful
I marvel how far technology has come that for about Rs 500 any DIY person can implement fairly decent and accurate motion sensing devices. I have many of these (including ceiling ones) at home. Found the wall mounted ones are especially suitable for entrances etc.Attached photo is taken from my bedroom. The sensor is at a height of about 1.8 meter and is at cross angles to the door. Put some black tape to cover part of it so that it is not switched on for every tiny movement inside the room. Works perfectly.Have used "GM 2-Pin Flexible Wire" which is a batten holder, 5 m of wire and a 2 pin plug, by splitting into two and adding a bulb.
S**N
Average In Motion Detection
I am already using a PIR switch in my washroom, unfortunately that sensor don't have LUX & TIME control knob / regulator, it only works in dark. So ordered this one, this works fine with time delay and Day time & Night mode both, but the sensor is not sensitive to catch moments. It can catch moments just from the line of straight, as said by seller it's not all working at 180° . My old switch had 360° sensor that worked flawlessly. I think i have to componsate with the motion and have to set high timer as to make it work, but truely i am not satisfied with the product.
G**R
Best product
I have been using motion sensors for more than 1 year. I use it in corridor, balcony, and bathroom.. This product has quality and it's angle can be adjusted.. And night / day mode can be set by turning lux setting.. Delivery is also very fast.. This product has worth it..
R**D
Save energy and help senior citizens
It’s a great energy saving device mainly for senior citizens.No necessary of switching on and switching off the light as it happens as Soon as you enter and exit.
P**T
Bad, not good third class product
Bad, not good and Third class product, please do not purchase att all, i have installed it and stopped working after 15 days, they are saying send it to Delhi with your own cost so that is additional cost of product, i recommend not to buy at all why to face trouble after purchase, go for something other brand...
H**.
Great Automatic Switch for LED Bulbs
APPLICATION: Kitchen Entrance Automatic Occupancy Switch with Manual OverrideUSE CASE: Automatically turns on the lights when entering the room allowing enough time to get settled before turning the lights off (I set it to 10sec duration). It does not turn on the lights when passing this hallway without entering the room.WHY THIS TYPE OF SWITCH: I selected this specific switch because I can quickly turn off the switch when getting up to leave the room so that I don't disturb others who are adjusted to the dim lighting. This switch will permanently stay off until its manually switched back into auto mode. Similarly, if I am entertaining without watching a movie I can set it to keep the lights on, even when no motion is sensed in the kitchen.Works great with any kind of lighting (CFL, LED, Incandescent). This switch was just what I was looking for. I needed an occupancy sensor switch that worked with LED lights . This one was it. It works great! The sensitivity, light, and duration are fully and accurately adjustable.This switch was easy to install, attractive, and works great as an occupancy sensor and fully automatic switch compatible with LED bulbs. Precisely what I needed.
S**V
Motionless Defector
It was installed by an electrician so no hassles. But the motion sensor is extremely poor. Sometimes it detects motion perfectly, sometimes. Most of time it fails miserably to detect motion even if a person reaches underneath it. I wanted to return the product but unfortunately the electrician threw the packaging away. It has no value for money as at this price you get a better product in the market. I installed another one in our basement at almost the same price.
Trustpilot
2 weeks ago
1 week ago