3M Stikit Red Abrasive Sheet Roll, 01687, No Hole, 2-3/4 in x 25 yd, 120+ Grade, Automotive Sanding Roll Sandpaper for Coating Removal, Body Repair, Auto Sanding

This is the 3rd roll of 400 grit ive used and have had good luck with them all, im sure ill buy it again when this one runs out.

Use for sanding body filler

Adhesion is very good on smooth surface, but not great on rougher surface or on wood unless the wood is very smooth and probably sealed. Such as home made wooden sanding stick. BUT worth the extra money.

Paper is thin and appears delicate, it is not. I've always thought sandpaper is sandpaper, I mean really what can you do to make it better? Well I don't know what they do but it's good whatever it is. Bought this to use on my air file for smoothing body filler and I'm super happy with this paper. Remains stuck under heavy use, very resistant to clogging, minimal loss in abrasion effectiveness over extended usage. I would estimate I can use this at least 3 times longer than other abrasives I've used. I'm cheap, I hate to change abrasive and will run it till it's smooth as a babies bottom, this stuff is like the energizer bunny it sands and sands and sands... Worth the price highly recommended.

This purchase was the 3M Red 320 grit roll, which I purchased after buying the 240 grit version. I'm impressed with the cutting and durability of these compared to other such products. Don't waste your time and money on cheap abrasive products. They will actually cost you more in the end.

There's not a lot to say about sandpaper, it smooths the surface of wood as expected. The paper is somewhat on the thin side and tears relatively easily. The adhesive is adequate. I use this paper to wrap around my drum sander; for this purpose it does the job. No complaints.

I bought a roll of this to regrind an old Marples chisel. (Hand forged in England, likely older than me)All I can say is wow.It sticks tenaciously to flat surfaces and put up with repeated use (...even a dash of water). So far it has dramatically outlasted the other 80-grit I've used.Not sure if 80-grit gets better than this. But this is well worth the price!

Sturdy, heavy duty professional caliber sandpaper. Grit holds up well so you will not be going through this roll fast. Pressure sensitive adhesive backing has just the right amount of stickiness—stays put but doesn't take Atlas to pull it off either. Certainly better quality sandpaper than you will find in your average local hardware store or one of the big box chain stores. Just what you need for abrading between finish coats.

Works well, hard wearing

Quality product. Adhesive is on the mild side but never hard to remove which is an issue with stickier stuff

While the adhesive is on the mild side it does stick enough to do the work it needs to. Best is to clean the blocks each time you replace. It lasts well and cuts even. 3m is a top brand for good reason

long lasting and sticks well to the block

It's sandpaper with an adhesive backing. The adhesive works well and the grit seems to be consistent. I use it to level the frets on my guitars by attaching it to a 2' level and using it as a sanding block. Peels off easy.