Samger Iron Steering Left Right Spindle fit for Ayp Craftsman Husqvarna 532403087 532403088 Steering Spindle Kit for Lawn Tractor
C**F
great fitment
The arms were easy to install and fir good
H**S
Alter Before Using
The shafts are to large. Don't panic, it is because of the paint. You have to remove the paint from the shafts in order for the wheels to go on. Also on the shaft that goes into the steering arm. I used a utility knife and scraped it off. Not hard but unexpected. Once the paint is off, they fit just fine. The paint is fine everywhere else, just not where they fit into anything.
E**M
Fit snowblower.
Like them and fit right
J**S
Size did not match original part.
Good price and the part was easy to install. However, the section where the wheel goes on was about 1/4" shorter than the original making it impossible to put a washer between the wheel and the retention clip.
J**A
Left side did not fit the wheel.
No quality control. Right side fit OK. but the shaft for the wheel on the left side was several thousandths too large in diameter.
W**W
Super tight fit
Had to grind them down to get them to fit… but it worked
N**D
Good fit, but only lasted 1 mow until they bent.
These appeared at first to work well, easily installed although had to polish the coating on the wheel shaft to get the bearings to fit. After 1 mow the steering brackets both bent, causing my tires to go in two different directions. Compared with the old brackets and these are thinner steel and not hardened, I was able to bend them easily with a wrench. Took them off and put the old ones back on.
T**R
Poor quality
Came poorly packaged. Coating had major bare spots, looks poorly applied. Looks like poor quality
Trustpilot
2 months ago
1 month ago