ZIRO 3D Printer Filament PLA PRO Metal Series 1.75 1KG(2.2lbs), Dimensional Accuracy +/- 0.05mm，Silver

Really nice colour and finish from the prints, easy to dial in with my standard settings for PLA. Nice to have see through reels, makes it far easier to see when you are very close to the end, having a bone bag is great - just take the bags of silicate from the packet, add to the bag and put in a half used reel of filament! Some people have said the colour is a bit bronzey rather than gold (more clean 2pence piece than old £1 coin if that makes sense) but the overall effect is there!

As with all ZIRO filament this is a great product to use. Its easy to print with, fantastic value for money and looks great when printed. The only thing to watch out for is that this colour is a dark gold so if you where looking to print something in a vibrant gold verging on yellow this is not the colour for you. However look at the pictures of the sword hangers i printed, the colour was exactly what i wanted and the finish was excellent.

This PLA came well packaged and included a Ziploc bag to store it in when not being used. I am using this PLA with my Wanhao Duplicator i3 Plus which has a glass bed and a full metal Micro Swiss hotend. The best temps are 210/50 and 210/0 as this sticks to a cold glass bed.I have had no issues with this filament at all and the prints I have done so far have turned out perfect. I really do like this brand and the colours are really good and do match the picture shown in the ad. I will be buying more for sure.

Had several of these with no issues, prints well and looks ok for a cheap silver. However the last one has used about two thirds of the roll fine but then the rest of it seems to be wound very poorly on to the spool causing it to keep tangling and has ruined several prints now. So the value for money versus the more expensive ones is out of the window anyway. The attached photo is how how I found it this morning with a ruined print waiting for me.

This is great PLA! It arrived on time and was well packaged and came with a spare Ziplock bag to store the spool between uses. I am using it with my Wanhao Duplicator i3 Plus which has a Micro Swiss all metal hotend and a heated bed. The best temps I have found for my machine are 210/50 or 3210/0 as this PLA does stick to a cold build plate. The Colour is as shown and the prints I have done so far are almost perfect. I highly recommend this PLA.

I am a massive fan of Ziro PLA. I have over 20 spools in different colours! I am using it with my Wanhao Duplicator i3 Plus, which has a Micro Swiss all metal hotend and a heated build plate. The best temps o have found for my machine are 210/50 or 210/0 as this PLA does stick to a cold build plate. The colour is as shown in the picture. The print quality of Ziro PLA on my machine is always perfect. I can't recommend Ziro PLA highly enough.

Excellent PLA, much cheapness too.I’ve been using it mostly to make scenery for war games, but wife wanted a Buddha and the photo shows the result. Stock Ender3, 210 nozzle temp with initial bed temp set at 62, dropping to 55 after first layer, Cura 3.6, .12mm layer height, 50% infill running at 60mms and no supports. STL downloaded from Thingiverse.Fantastic result, so impressed I’m making this my ‘goto’ Filament.My one gripe and the reason I only gave 4 stars is the roll the filament comes on is Chamfered on one edge, if like me you use a roller guide for you’re filament rolls, this chamfered edge snags the bearings it sits on pulling the whole thing towards the printer... 🙄

1st off. Ziro is my favourite filament, it prints very well, they have a good range of colours and it is excellent value for money.BUT, holy crap the winding is bloody awful, you take the spools out of the package and my immediate thought was "this is going to snag"Then while printing you notice kinks in the filament.Come on I realise that I'm not paying 45 per roll but ziro invest in some new spool winders, I would pay a few £ more.

Es PLA, por lo que eso conlleva. Es difícil de lijar como todos los PLA. Aconsejo usar lo menos posible soportes, y poner interfaz de soporte

Bin zufrieden

Très bien

Printer Robo3D R1+Hotend E3Dv6Nozzles : .25, .3, and .450-70 mm/sec print speedsAs specified in other Ziro Reviews... Ziro is now my GO TO filament. I really love this stuff!.. If might be one of the best quality filaments I have used.I buy filaments all over the place and I would categorize all of them as* Crap (You just cant print anything with those no matter what temp you use) Excelvan Yuk!* 220c+ Need High temp to get them to print right (No name filaments, lots of e Bay items)* 206c-216c Middle of the road, but way great filaments (eSun, Foxsmart, etc)* 204c or less Ziro (yes, it's own category) Ziro will jam if you print very low layer heights .15 or less with a high temp. My guess is that the heat travels up this filament a littler easier than other PLA's and this will cause it the melt a little higher up the heat break. (if printed too hot) If you print fast and at a layer height larger than .2, or .3, or .4 you may be extruding faster than the heat can travel up the filament. It took me a long time to figure this out. My first roll of Ziro was green PLA and I printed some items that had sharp threads. Wow I was taken a back when I seen how accurate this filament prints. It even made me change my print profiles because I was getting such decent prints with it.The fact that Ziro is a lower temp PLA is not an issue it's just a property of this filament. It also may be why it is so silky smooth and has a hard to describe but very wonderful dull luster! I really like this look. It makes items printed have a more "Professional" look. Place a 3D printed item next to a injection molded item and high quality plastics to me have a lower shine. Example: look at the bezel around your monitor. That is the "pro" shine I see in Ziro Filaments.

This filament is a great for those who are on a budget. This filament is comparable to other popular brands in this price range, but are not as easy to get dialed in and does not have the surface quality that those other filaments have. I was able to get some pretty decent prints with this filament, but not perfect. There were some layer inconsistencies and diameter fluctuations of 1.67mm-1.85mm. The color is very nice and has a metallic look to it. Now this could have just been a bad roll but I also bought the gold PLA from them that does not have such a large difference in diameter throughout the roll. The spools that they use are clear, which I think is awesome. You always know how much filament you have left just by looking at it. On my Geeetech Mecreator 2, I printed with this filament at 195-200C with a bed temp of 60C on PEI. Never had any adhesion issues with this filament. All in all, this is not a horrible filament and I think I may have just gotten a bad roll but with that being said, for the same price you can get filament from some other brands that are a bit better with their tolerances and produce better surface finishes than the Ziro filament did. I have a video review of this filament up on my youtube page, 1HandTech, if you want to check that out. I would like to get more filament from Ziro to review just to see if this was an isolated issue, or if it is just not very good. In the mean time though I would suggest spending the money for filament on some other more well known brands.

My first time purchase of the Ziro brand, needed some bronze color PLA for a print, and not wanting to spend top dollar for a filament I'm not going to use on a daily basis, so I shopped around for best price and ratings. Cost was about 1/2 the price of my favorite PLA brand. When it arrived I loaded it on my A10 and hit print using Gcode generated for Cura generic PLA settings. Print ran for 8 hours or so and job done. I had tiny amount of stringing, but did not attempt to make any adjustments other than raise nozzle temperature at the start to 200 deg's, and the job ran just fine. Easy filament to work with and with some tweaking of settings I'm sure the stringing wouldn't be an issue. Comes with a nice zip seal bag for storage and no-eat-um's for moisture control. Overall, a very good filament experience and will need to check out their other colors in the future.

Tried a few other types of filaments from ZIRO and had nothing but problems with the feeder skipping and nozzle clogging ended up returning it and ordering something from Gizmo dorks or hatchbox as I've had better luck with those two brands

I liked the bed adhesion and color, as well as how it looked layered. Made a tissue box, as you can see. Has a nice sheen to it! Thanks, high quality filament.

This is the real deal. Hits all the buttons, and the color is more metallic looking than filaments I've used that have metal in them. Thanks, ZIRO, I love this filament.

Bronze Color.Pros:Excellent metallic-looking color. Excellent size consistency. Transparent spool. Comes with pouch for storage.Cons:None that I've seen.Based on the flexibility of the raw filament, it seems like a modified PLA.I've printed an entire spool and ordered a second. Of all the PLA I've bought, this is my favorite.

Going to print up a Tesla bust for my father in law. Did a test print, and this stuff looks perfect. Really happy with it!

Really neat looking when printed. Not shiny, but gives that impression. Depending on the resolution of the 3D Print, could be smoother, but we were in a rush. The blue light in picture is from the 3D printer.

Good price, the resealable bag and dessicant prompted me to try ZIRO. The silver color laid down smooth and flowed well at 215 on my CR10S. It's a nice sheen with a bit of sparkle to it. I'm looking forward to their other metallic colors.

Printed beautifully. Great price for a metallic bronze filament.

Sure it prints good like all my other ZIRO filament but if I wanted Gray I would have ordered gray. This color is more like gray with glitter flecks.