Outdoor Indoor Waterproof 12VDC 24VDC 600lbs Holding Force Magnetic Door Lock with Z and L Brackets for Access Control Door and Gate Opener, Fail Safe Electromagnetic Door Lock Gate Lock

Works great. Keeps my gate shut during high winds. Hooked up to liftmaster la400. Relay was not required but I had to look up wiring instructions on line to make it work with my gate opener. Would definitely buy again.

Good magnet, great price!

The included bracket selection contains enough different parts to make installation work well. It's important that the installed magnet's angle match the ferrous metal contact pretty closely. If they aren't matched well it won't lock. This required some adjustment and work with shims beneath the contact surface.I ordered this lock along with the Uhppote power supply (item part number: UT0431-01) and they work well together.

Used this to help hold my front gate together. The install was all custom so the included brackets were not usable. The design is compact which was nice, but was a little disappointed it only has about 60 Lbs of holding force, you can pull it apart, but the price was good and I only needed it to stop the wind from blowing my gate around. And it does that.

I purchased the Supreform E-lock/Maglock for my Elite Miracle One (EM1) gate opener. Initially, I had trouble of figuring out how to wire it, none of the configuration diagrams provided would work for my EM1. I measured the output of my EM1 Maglock (connector pin 2 & 3) and got only 10-12 VDC at the beginning of each open. I contacted the Supreform manufacture and asked them if I can use the 12 V Relay and wire to my EM1 using 24V Relay’s diagram. They replied with a “YES”. It works great after all of the troubles because not enough information. Great product, very low price, comes with two relays (12V & 24V), all needed mounting brackets, very lightweight, low power consumption, does not need extra power supply, connect directly to the 24V battery and they provide great support.

The media could not be loaded. Due to occasional strong winds, gate was pushed opened sometimes.Now, with the maglock in place, it seems to Hodor - hold the door.For those who ask why it's outdoor/rain friendly. The internal electronics is covered in black resin.And as for the small hole where the connection cables come out - just use some sillicobe or an ear plug to fill it (although, unnecessary)

They added detailed instructions for install. Very happy// super weak. Doesn’t hold. My kid can open it with simple push on aleko gate

Easy to install and works well