DC 24V Adjustable Cycle Time Delay Relay Module, Delay On/Off Timer Delay Switch Module 6 Types Optional (DC24V 0-15mins)

works great.

The adjustment does not work. Once this gets power, it’ll click on for one second then turn off and will not work as on delay.

Everything works exactly as advertised. I had to add some peripheral hardware to make it do what I wanted. (I really would like to find some little turn key timer module that has a retriggerable function), but this will do in a pinch. This is still a nicely designed and assembled product at a great price.

I used this with a 12v power supply, magnetic switch (as trigger) and red 12 v led trailer markers to make a parking assist for a friend. Mounted a magnet to a length of 1/2 inch pvc full of sand which moved magnet past switch triggering timer to turn on leds for 30 seconds. Stop the car. Backup to tennis ball on string.Only issue is adjusting the time. Even on t/10 the pot is very sensitive and if you need a specific time it will take some doing. Also the mounting hole on the board are very small and I just zip tied it to a strip of plastic and mounted that. All my spare computer hardware stand offs didn’t fit.

I clicked on the 12 volt option but something must have gone wrong. Not sure if it was a computer glitch or if I made a mistake. Their product description is unclear because it states the relay is 12/24 volts. Because of this I did not catch the mistake. I really like the relay's design and I wish I could use the ones I got. Order carefully. The 24 volt relays do not work on 12 volts. There are more expensive cycle relays I've used that have digital display of the time. They use more power and are much more cumbersome to adjust because you have to adjust every digit individually. With these you simply turn a screw one way for more time the other way for less. One screw for the on time and another for the off time. So simple.

It worked great for me. I needed to automatically turn an induction heater Off. I left it On once.I was able to make a timer to turn Off after 1.5 minutes but automatically turn On with power On by soldering a 10uF capacitor to the trigger terminals. (- is closest to the corner of the board.)

The media could not be loaded. I wanted a timer for my water pump to run for 6 seconds and be off for 6 seconds on a cycle and this one did the job for sure.Amazing how much adjustment you have.Make sure the switches are turned clock wise all the way. That is your 0 seconds, and then anti clockwise is the increments of time for the setup

pugged in lights work test relay function, it doesn't work, the relay is bad out of the box, put a test light on it (small load) no change the relay on the board is bad. exchange for another one but i have to pay to have it picked up from my house or drive 45 minutes to a pickup location, feeling so glad i have prime right now, for a 10 dollar item they want like 9 dollars to pick it up to return it, its upsetting because it was bad out the box and no-one cares, it will cost me more to make it right.

The media could not be loaded. Temporizador para que se apague el extractor

Working as expected so far (been on the test bench for the past week and working well / as required. It does take a bit of "tweaking" to get the timing to what you need - but once that is dialed in it works well. Will update review if anything changes once installed.

👍

Aunque es muy sencillo, no trae ningún instructivo para manejar, se tiene que aprender con el mismo equipo

Item arrived with "scotch tape" on the anti-static bag. Open it up & the 2 included cables are missing.To top it all off on close examination of the board & components a transistor is cracked open !Never saw that before...