Steelman Inner Liner Sealer, Seals Repairs, Fast-Drying, for Tubes and Tires, Applicator Included, 16 Oz.

I originally used this bead sealer on a couple of lawn tractor tires. These low pressure tires have a tendency to leak, and many people put tire tubes in them to get around that problem, but I hate tubes so I was hoping this would do the trick. I am happy to say It worked great. I used it to seal both the rim bead as well as new valve stems. I keep the tires at 20psi and about a month after installing them (including temp swings up to 85F days and down to 40F nights) they're still holding pressure, no leaks.Seconds use; My truck had 1 tire that had a slow leak that required reinflation every couple of weeks.. found the source of the leak by dipping the tire/wheel in a large container of water and looked for bubbles. It was leaking air from the bead right under a cheap hammer-on wheel weight that had a rusted clip. I broke the bead of the tire, removed and cleaned the rim and weight, applied the bead sealer along the entire rim, re-set the bead and pumped it back up. It has been about 3 weeks now, I have checked the pressure multiple times and hasn't leaked at all. I am very happy with this product, and would highly recommend it to anyone who has a bead sealing issue or wants to avoid them in the future when installing a new tire.NOTE: For anyone who doesn't know exactly what this product is (I didn't when I first saw it); It is NOT a tire/rim lubricant (you will still need to use tire lube or soapy water to install the tire on the rim). Think of it like rtv gasket maker for your tires, as it essentially does the same thing, it compensates for imperfections in the mating surfaces by filling in any gaps. This stuff is like an ultra fast-dry rubber cement, and when I say fast I mean really fast dry. You need to work quick with it when applying as it will dry solid in under a minute, so "paint" it on and set your bead right away or you may not get a good seal. Good luck and happy bead sealing!

Does A great job sealing beads of tire, sure on older tires

Are use this for repairing tires with plugs. I put this on after the plug is glued in. It works great and no leaks. Good value for the money I recommend it.

Purchased this based upon other reviews. Works as advertised. Sealed small air tire on trailer to rim which previously had been leaking. After using this product, tire sealed with no further leakage around rim.

The cans as received were very dented. I was able to open the can and verify the contents and they seem to be OK. Appears to be the stuff I'm looking for. Thick, gooey and able to make a seal with old wheels and tires(tractor restoration). Unfortunately this product was delivered to the address I wasn't expecting(I have two-one in Texas and one in Missouri) but that might have been my fault. I thought I checked the Missouri address but it was delivered to Texas. I needed it in Missouri where I have a small investment in an autoshop. Hopefully the next time I head north the airline will let me take it with me.

1st time using and it seems to work as advertised

I used this on a scooter tire that I had changed and was getting a pretty nasty leak from the bead. I deflated the tire, pulled the bead back in the area it was leaking and put this bead sealer in. Put air back in and it does not leak. Directions do not tell you if you need to let this product dry before inflating, but I did not, I inflated the tire while the sealer was still wet and it works great.

I had a troublesome front Tire on a custom motorcycle. Wheel runout was within acceptable limits. Tire was removed 3 times and remounted but still leaked around the bead. This bead sealing product works perfectly! I fixed the tire myself and is holding air. Great product for troublesome tires.