Easihold Rock Glue 1.3 Gallon – Gravel Binder for Pea Gravel & Stones. Long-Lasting Mulch Glue for Landscaping – Non-Toxic, Ready-to-Use Gravel Lockdown for Paths, Patios & Garden Borders

This product works amazingly well! I used it to keep gravel in place on my pathway, and it really does the job—no more loose stones shifting or scattering around. Once applied, it dries clear, holds the gravel firmly, and still lets water drain through naturally.It was easy to apply and made the whole area look neat, stable, and low-maintenance. The durability is impressive, even after rain and foot traffic. If you’re tired of constantly raking gravel back into place, this glue is the perfect solution.

It worked so well for our flag stone patio. We dug out all the dirt in between the cracks, filled them with new rock and did 3 coats of the glue. It took some planning because we needed to first do a coat on top of the rocks and then we had to “try our best” to mix the rocks and glue together while in the cracks. And then do another coat sprayed on top right after. Then the next day you have to do a final coat. And after this process we needed there to be 36 hours of no rain. But that makes sense. Just needed to keep a close eye on the weather. Surprisingly we did go through 3 big bottles though. But HIGHLY recommend it. All rocks are glued into place and it looks so neat and put together! Will definitely be using this in the future .UPDATE: It’s been a few months since we glued it and all rocks are still in place. AND there is not one weed growing in the cracks even with all the rain we have had the past few months. A lot of other reviews said weeds were growing through but not ours. I added a before pic so you could see how many weeds we use to deal with.

The only reason I gave this at least one star is because for the areas that you’re able to actually get the liquid sprayed onto stone or gravel, those areas do stick together provided you use enough liquid. Other than that this product was a pain to use.I followed the instructions and poured it into a spray bottle. Within two minutes of spraying the liquid from the spray bottle, the spray bottle stopped working. Initially I thought the problem was the bottle so I switched to another bottle. The same thing happened with the other spray bottle, even though it was a completely different brand and design. I eventually went through four different spray bottles and each of them stopped spraying within a few minutes of use. I concluded that the gravel liquid appears to have molecules that are either too big so they do not easily pass through the spray nozzle, or the glue in the gravel liquid is damaging the nozzles and spray mechanism in someway. I also noticed when you’re pouring out the liquid there are a lot of visible fumes. This process lasted almost 3 hours most of which was frustrating. When I checked the stone the next morning, all were still moving.I went to the hardware store the next day to buy a brand new spray can. Again I poured the gravel liquid into that spray can and within two minutes the spray bottle stopped working. I immediately washed out the spray can and then decided to use a different r gravel liquid from a different brand in the same spray can. The spray can worked perfectly without any problems when I used the other brand of gravel liquid. I then tried to reuse this brand gravel liquid in the same spray can and again the nozzle would not spray. I found the other brand of gravel liquid much easier to use and it gave me no problems. As for this one, I will never use it again. .

I had a 4’x 15’ section of pea pebble walkway that I used this for. I used 2 gallons and it’s pretty solid. Gives a bit of sheen to the rocks which I like. Installation was horrible. It would constantly clog my sprayer and I would have to take it apart to clean. There’s a bit of glue chucks inside that made it worse. I would recommend straining it before you put it in the sprayer. Still clogs but less. The pour on method wastes too much. It’s a messy process and the glue gets all over your hands and is a pain to remove. But for the glue itself I would use this again. I did one coat, waited 3-4hrs, then did another in 90 degree weather. So far so good. I like how solid it is. I may do a 3rd coat just for extra strength.

I didn’t actually follow the directions. We put slate down and have pea gravel in between. So I mixed the Esihold with the pea gravel in a bucket and then scooped it into the gapes in between the pieces of slate . IT HOLDS GREAT . The directions said Not to saturate but it’s been working perfect. This is not walked in much because you kinda walk on the skate but it’s keeping the pea gravel in place and the weeds out .