Maxpower347574 Premium Belt Reinforced with Kevlar Fiber Cords, 5/8" x 29"

Kevlar strand make this belt exceptional on chipper shredder usage.

Good Kevlar belt for the price compared to what was available near me in-store.

Third update...belt is still going strong. Hours more use, and no issues to speak of. Seems like the perfect belt. Hard to believe it works as well as it does.Second update to my original review below.... I'm extremely impressed with this belt. I have since used it for a minimum of 30 hours of very hard chipping and shredding. I'm talking about having a very large brush pile that I had accumulated over several years, so it was a combination of fresh green limbs, hard dry limbs, and even some rotted limbs. I was feeding this stuff in as fast as I could, not walking to get another limb from a downed tree, so it was working very hard.I spent a lot of days, basically running each day until a fresh tank of gas ran out before taking a break, and this belt has been up to the task. The only thing that I notice is that the "fabric" looking covering that wraps around the entire belt seems to be coming loose from the inside, thinner edge of the belt that is inside the driving V-pulleys, but, other than that minor issue, that doesn't seem to affect the belt in any way, it has worked far better than expected. No smoking, no slipping, no need to adjust for stretch, no issues at all.Considering the number of large limbs that I ran through the chipping blade, which can really drag the cutter wheel and cause slipping of the belt through the motor pulley and heating it up, I don't think you could ask for anything more from a belt. I even had a small chip wedge itself in-between the cutting wheel and the frame, causing a constant drag on the cutting wheel, and some smoke from the belt before I could shut it down and clear that chip.Just a note, when chipping, you want to "jab" the limb into the cutter blade, in and out, so that it chips a little, and then allows the blade to catch back up to the same speed as the motor, otherwise you will drag down the blade-wheel speed and the motor is fighting it to get back up to speed, which causes slipping and heat due to friction, which can melt a belt quickly if you don't do it right. You also want to rotate the limb in 90° turns after each jab so that you don't create a thin strip of limb that goes between the cutting wheel and frame. Shredding doesn't have this issue nearly as bad, as it's just a bunch of flailing edges beating the smaller limbs until it shreds them.Original review below:I bought this for my Super Tomahawk 5hp chipper-shredder, which is about a 1989 vintage. This belt has performed flawlessly so far, after about 10 to 15 hours of use. No burning smell, it is flexible, and it seems to be the perfect fit to the machine, which is supposed to take a 5/8" wide by 29" length belt.So glad to have found this belt, though I don't know why it didn't show up in my initial searches for a replacement belt.I used the Murray belt, under the same usage conditions, and it only lasted about 1/2 hour, or less, before heating up, burning hot, and disintegrating.

Belt is great replacement for my 1960's Troy built chipper shredder. Works perfect and fit great. It's not bulletproof so don't shoot at it.

Looks like this belt is doing the job very well. I’m happy.

Put it on my super tomahawk chipper. They hold up better than most belts..

I had read the reviews others had left regarding replacing their belts on Tomahawk chippers, compared the measurements and such so I felt confident in the purchase but after a few hours use I smelled burning rubber and saw a strip of rubber fall to the ground. The outer material somehow stripped away and the rubber started wearing away quickly. I couldnt find a way to contact the company here or chat with anyone, but ultimately I was going to have a poor review. I hope amazon will accept a return because thats good money wasted. Hopefully theres a better option out there, I had high hopes this could get me working.

It was a perfect replacement For my garden way chipper shredder.

I used this belt one day and I can see that the inside of this belt is shredding up coming apart from the inside out I don't I will definitely look for something else should last longer the one use and this one isn't.