AceShot Covert OPS Thumb Grips (8pc) for Xbox One (Series X, S) by Foamy Lizard ® Sweat Free 100% Silicone Precision Raised Antislip Rubber Analog Grips for Xbox One Controller (8 Grips) CAMO

Pros:* These thumb grips provide a good, comfortable grip.* Providing pairs of caps at different heights makes it possible to adjust to whatever fits your hands best.Cons:* A bit difficult to put on.While these grips might have been a little difficult to put onto the thumbsticks, they stayed put once attached. The last pair of grips I used had a nasty habit of sliding off and the Aceshot grips sure fixed that problem.The tall thumb grips were a bit too much for my short fingers, but the regular-sized pairs are perfect. They are definitely more comfortable than the stock grips or other third-party grips that I've tried. I used the concave and convex grips as suggested and I've found that my ability to manipulate the thumbsticks has definitely improved.

These look better, feel better, will probably stay on better than KontrolFreeks, they're cheaper, and you get four pair (two pair convex, two pair concave) instead of just one.I got my nephew a pair of Kontrolfreek Galaxy's for Christmas. He loves them but they would fall off sometimes at the worst moments. I looked into getting myself a pair for some of the shooters and racing games I play and I came across these.These attach by a rubber lip that completely surrounds the top of the thumbstick, whereas the Galaxy's "clip" on via three or four plastic clips, which cause them to fall off if you're too aggressive with them. I don't think these Foamy Lizards are coming off unintentionally.The only minor issue, which I don't really care about so much, is that it looks like they might attract dust and lint. Overall a great product and a huge value over Kontrolfreeks

Good value. Really easy to put on. The rubber is a lot harder than I had hoped. It isn't bad, I just wanted something a little squishier. Works as intended. Adds a bit of cushion to your analog stick and the thicker ones also increase height and can even improve accuracy in some games. Although the thick ones tend to block your left thumb from hitting some of the buttons, especially the Back button. Will also prevent wear on your controllers analogs or give you a surface to interface with on analogs rubbed down to bear plastic. Not bad, but not the soft type of rubber.Update:I’ve been using these for two years. I added a pic of the ones I’ve been using. This set is two years old. I’m retiring them now and putting on a new set. It’s overdue actually. The fit when they’re new is pretty good. I have another X1 controller I put these on I don’t use very often and the fit is still tight. The worn ones are pretty lose. They do occasionally fall off if I bump into them from the side. But they never fall off when I’m gaming. You can see the nubs are mostly worn completely down. The funny thing, in my original review i mentioned wishing they were squishier. Once they get old and worn out, they’re pretty squishy.I don’t like the big ones. After playing with them for a bit I decided I have no use for them.The one problem with these worn out analog covers is if your fingers are greasy, they get slippery because the nubs are worn off. Of course you can just wipe it off with your shirt.The best thing about these, aside from the additional grip they provide, is my controllers still look brand new, even though it has hundreds of hours of use on it. And I don’t have to open the controller to put on a new set. Whereas, new analogs would require the skill, knowledge, and confidence to open your controller and replace parts. I’ve done it, and I hate working on controllers. They’re too easy to brake or lose parts, especially the little springs on the triggers.I’d give 5 stars, but the big ones are a waste of money for me. I bought another set, because the fitment is perfect and the durability is excellent.

I got the black version, and am only using the long, concave (dished out top) version, on the right thumbstick. The idea was to get more "throw" of the joystick to improve shooting accuracy (I play mostly Ghost Recon Wildlands). The left "movement" Joystick did not need more accuracy or sensitivity, so I didn't put anything on it, even a short extender from this kit (though I might try one later).It is not too tall to be comfortable, and does seem to allow better fine control of aiming. In the game's controller setup I've increased the speed of "Look" and "Aiming", and may increase them further, as the longer stick allows better fine control near the center, which then allows more rapid movement at the extremes. On this game, I have the "Dead Zone" set to zero, and there is no drift.Some people have complained of these coming off. I don't think I will have that problem. I put mine on the controller that came with my Xbox One X console. I had been using it for over a year, not playing every day or intensely, and it had a bit of "grease" and "wax" from my fingers in the groves at the top of the joystick, but no physical damage at all. I cleaned it carefully with damp and dry paper towels until it appeared clean and grease-free, than pushed on the extender. I tilted and pushed it on from one side to try to get the extender to cup down over the top of the joystick, but it did not immediately do this completely. Squeezing the extender repeatedly in different spots near the bottom, wiggling a bit and poking with a small dull tool eventually got the extender to cup down symmetrically all around the top of the Joystick, which required examining under good light to verify.You should see the extender cupping down evenly all around, nearly touching the thin stick underneath the broad round joystick top. I suspect that some people did not get the extender down fully gripping the joystick top, and part of it was jammed up on top of the joystick, hidden, looking OK, but not fully installed. Either that or there are variations in some production lots, or perhaps in the Xbox One joystick heads in different eras of joysticks.It is very stable and has shown no tendency to shift around or slip during game play, including when "going to the rail", or pushing down to "click the stick". I expect it will last a good while, and because I only used one, I have a replacement ready to install if this one gets loose. It is not heavy enough to make the joystick feel sluggish, or to move unpredictably if the thumb is removed briefly to hit a button (I don't hold my controller with the "claw" style grip).Only thing that gave me pause: While the packaging is quite nice - a small sealed plastic bag with a "Ziplock"-style reclosure - it did not mention Xbox One (or any other console controller type). No problem, it fit fine. A nice feature of the package: you tear off a strip to open it the first time, so you know you are getting a factory-fresh set, and not a return.

Ordered for my son and he loves them!

El producto llegó en el tiempo estimado de entrega. Las gomas se perciben suaves al tacto, se colocan encima de la goma original a modo de protección por lo que no es un reemplazo.

Works great on xbox 360 controller.Tight fit.Put them in hot water before installing for easier fit.

The right price and cheaper than the name brand, does the job. Provides more range of control then the shallow sticks on their own.

Fits Xbox one controller just fine little loss, so i kept old one on it so now it fits just fine.

Items as described yet to try...