Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points 2pack

These appear to be sketchy knockoff quality fan hubs which scared me, but for the price I figured why not.These turned out to be exactly what you'd expect. They perform perfectly and feel of relatively high quality. I did not have a problem with the 2 units that I received.Obviously, Republic of Gamers is an Asus marketing line, so this rightfully appears suspicious. However, if it is the same quality and product, in the end it works just as well.

Worked perfectly. Purchased the 2 pack. Allowed me to sync my 18 case fans with PWM settings with no problems. Very pleased.

I could connect all the fans I needed, running my cpu AIO cooler pump sepedately though. Although it is connected to a pwm header, for some reason my motherboard is not able to control fan speed variably hence only 3 stars. That being said, it works alright and I don't have any temperature issues with my PC.

Item: skineat Chassis Fan Hub CPU Cooling - 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller - Dedicated Supply from PSU to Link Multiple Points - 2packASIN: B089RGZWQ1Review Date: June 20, 2021Using these to provide power and control for numerous fans in a full size tower DIY file server build holding twelve hard drives. Needed two as I want to use both the CPU and Sys fan headers from the motherboard.I marked them as one star for ease of installation as I expected the double sided mounting foam pads to not be applied to the boards. Particularly when you look at the provided pictures and you can see through the mounting hole. So I expected the pads to be separate. I am using the mounting holes instead with nylon standoffs, screws and nuts to mount them.Removing the pads was fairly strait forward, removing the adhesive the pads left on the boards was a different matter. It was after the pad removal I noticed that the leads of the fan connectors were not trimmed as they should be on the solder side of the board. Trimmed leads and reflowed all solder connections as appropriate.Take Care & Enjoy!

Worked just as said

I purchased these thinking that I would be able to control the fan speed of my 3 pin fans. This will not control the speeds of them. No matter what settings I use on my MB it will only run these 3 pin fans at a constant full speed.

Worked as expected. Perfect for what I needed. The double sided tape could be stronger, but for the price it's hardly a problem. Would definitely buy again.

This thing is great: it reads the tachometer from your CPU fan header and broadcasts it's PWM signal to any plugged in fans that support it. You connect the header opposite the SATA power connector to your CPU fan header; then plug in your CPU fan into the read fan header on the board. The rest of the headers are for case or radiator fans. It's powered by SATA so you don't need to worry about draw on the motherboard.I lost the 3M tape/foam the came with mine, so I screwed a motherboard standoff into an unused standoff hole (but opposite the motherboard side) and attached the hub via it's screw hole. All my fans are connected there behind the motherboard plate.The only downside is that you can only monitor the fan connected to the red fan header on the board. The system won't see any if the other fans. That said, they'll all be spinning at the same RPMs as whatever is plugged into the red fan header (given differences between fan min/max RPMs)