Twenty39 qarbo CLASSIC Sparkling Water Maker Machine - Soda Beverage Carbonator for Home, Seltzer & Carbonated Beverage Dispenser, Water Carbonation Fizz Maker (Polished Chrome)

This is my 2nd soda machine and WOW, it is a big step up from the standard style, and a much better bargain, too. I highly recommend it if you are looking for a system that allows you to heavily carbonated sugary beverages. That is the #1 advantage of this system. It is just as easy to use though the steps are different.Be advised, there is an o ring that needs to be installed before attaching the co2 tank. The instructions make no mention of it. I thought it was defective because gas spewed everywhere after attaching the tank. It wasn't until I was repacking it that I notice a 2nd cap squeezed deep into the packing materials with a tiny package with the o ring inside. I had already requested a replacement and now I have to return the 2nd because Amazon was amazingly fast at sending another.The bottles are tall and thin, so I store them on their sides. The shape makes heavy carbonation easier and the caps seal tightly, so they don't leak. This is not a negative if what you want is a lot of carbonation.The steps are different too. First, add the flavoring, then chilled water, attach the injector cap, and then inject the co2. The instructions suggest pushing the button for 2 to 3 seconds up to 3 times until the level is to your liking. I have found that 1, 3 second burst is enough but have tried a 2nd burst. It was overkill for my taste.Once you have achieved the desired amount of carbonation and removed the bottle from the machine, it is recommended that you tip the bottle from side to side to absorb more of the co2 and to mix the syrup or flavorings added. There will be significant frothing in sugary drinks.Before you can remove the injector cap, you need to give the beverage a few seconds to settle. Then release the excess gas by turning the cap 1st to the slow-release setting then to the faster setting. (Again, this takes seconds).And finally, you remove the injector cap and replace it with the sealed cap provided to store the drink. Sure, you will lose a small amount of carbonation in this process but whatever the loss, it is slight compared to adding flavorings after carbonating the water. And that is it. You now have 2.4, 12 oz servings of soda.The injector is cleaned by simply immersing it in plain warm water for a few minutes then allowing it to air dry. I recommend purchasing an extra injector if you are going to make several different flavors. That way you always have a clean and dry injector for use. Look for the package deal offered. Mine came with 3 injectors & 4 bottles.The bottles store fine on their side and will keep it carbonated for at least 24 hours. If it does go flat, you can carbonate it again.I highly recommend this machine for soda lovers. It is a bonus that it is attractive. I got the bronze color, and it is true that the machine is a deep bronze color while the trim on the bottles is more of a rose gold that compliments the machine. The coordinated colors are beautiful.PS. If anyone has a good cola syrup recipe, I would appreciate it if you could share it with me :)

This was definitely an impulse purchase BUT I'm very happy with this product. Easy set up and use. Love the sleek design that takes very little space on the counter. Comes with 2 bottles & the carbonation cap that is separate (not attached) making it easy to clean and sanitary. Though not a biggie, but at this price point, I wish it came with at least 1 Co2 Tank as an add on. I purchased the Soda Sense 60L (threaded connector) tanks & they fit & work perfectly.

I purchased the Twenty39 Qarbo Sparkling Water Maker five years ago, and I am thrilled to say that it still works as perfectly as the day I brought it home. The Qarbo’s modern and minimalist design has always been a standout feature. It looks great on my countertop and doesn’t take up much space. Even after five years, it still looks as good as new, which is a testament to its quality craftsmanship. Also it is using Sodastream CO2 cylinders that can be replaced or exchanged.

I love this product. We had a soda stream many time with “love for short period - then bored” type experience. This product is different. I love the shape of the bottle ( reminds me of Voss water bottles which I love), they are easier to clean as well than regularly shaped bottle. I am absolutely CRAZY about the ability to add fruit etc to your sparkling water without the need to add any type of artificial flavor drops. Kids also added the regular soda mixes (from soda stream) like coke, root beer, and my tonic water :))) with a success. The down side - it is a bit spendy considering it comes without the Co 2 tank and also feels like a bit cheap plastic. - none of the less looks very slick on the counter and does not take much space at all! Would by it again.

UPDATEWe got the CO2 cartridges and have made about 15 litters of bubbly water. Unit is performing well. We went to the maximum suggested 3X a 1-2 second press on the valve release. This gave us a sparkling water that was very carbonated and mimicked a local grocery chain’s product, which we love.So far, so good. And satisfied, here.My earlier review is below, if interested.********I’ll return and post a more detailed review, when the CO2 cartridges arrive and the unit is put through its paces.CONS:At first wash, though, I was amazed at:1) How lightweight and thin most of the plastic is. In fact, when I picked up the packaging—a carton—I thought the manufacturer must have left the unit out. Everything, today, is plastic, but this product seems particularly light in weight, for the price charged.2) Because the plastic is so light, the chrome/plastic finish seems even cheaper looking when handling the unit.3) The two container “jars” are extremely tall/thin, as pictured. We have fridge shelf space for something that tall, but with no wide base on the bottom of the plastic container to stabilize it, I can see that this plastic jar will easily turn over in the fridge. I suspect, if we like the carbonated water, we’ll descant it into another, more user-friendly container. However, I wonder how much “fizz” will be lost in needing this extra process. And this need defeats the purpose of having an extra jar that came with the unit.PROS:1) Because of the thin/tall design, the unit doesn’t have a large footprint for storage on a shelf, if you have a shelf that can handle the height.2) VERY simple to use and straightforward, it seems.3) Because it is so lightweight (and, I fear, more prone to cracking), the company uses volumes of foam, cardboard, and general packing material. This is good, as the unit was flawless, when opened, but, then, you have LOTS to recycle, too, so .. . . .More later.