🚀 Elevate Your Ride with Style and Functionality!
The Auto Ventshade In-Channel Ventvisor is a custom-fit window deflector designed for 1980-1996 Ford Bronco and F-Series trucks. Made from durable impact-modified acrylic, it allows fresh air circulation while blocking out weather and debris. Installation is a breeze with no drilling required, making it a perfect upgrade for any truck enthusiast.
Color | Smoke |
Brand | Auto Ventshade |
Exterior Finish | Smooth |
Style | In-Channel - Smoke |
Auto Part Position | Outside |
Installation Type | Window |
Manufacturer | Auto Ventshade |
Model | Auto Ventshade 192068 |
Item Weight | 1.8 pounds |
Product Dimensions | 46.88 x 11.88 x 1.88 inches |
Country of Origin | USA |
Item model number | 192068 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | 192068 |
OEM Part Number | 192068 |
R**A
Perfect fit!
I installed these window visors on a 1993 Ford F250 & they fit perfectly.Previously the truck had a cracked/faded/old pair of a different brand name installed & they looked horrible....in addition to looking bad, they were very wide & the front triangle windows would not open on either door due to the visor hitting the glass upon movement. I removed the old visors & old double sided tape, cleaned the surface, and then installed the new Auto Ventshade 92068 on the doors. PERFECT FIT! And, the best part is that these are not nearly as wide & my triangle windows will open fully with no contact with these!Very easy to install & they look great.*** Tips on installation ***- If removing old visors & old tape, keep in mind that the old tape will basically be as hard as chewing gum on the bottom of a middle school lunchroom table.....almost impossible to remove without scratching your paint. It removes much easier when hot, so either park in the sun or use a blow drier on it. Also, to remove it use PLASTIC!! Do not use metal (it will scratch your paint). I found the easiest way to remove the old tape was to heat it up, scrape it off with a 20 oz drink cap, then (while wearing gloves) use isopropyl alcohol with a rag to rub the remaining glue off.- Clean the surface with a streak-free glass/window cleaner. Dont use the included joke of a "cleaning pad" that is nothing more than a wet-wipe from a fast food joint.- Line the visor up BEFORE removing the adhesive tape film. If you cant eyeball it easily, take to blue painters tape & make a template on the door so you can line it up 100% correctly. Keep in mind that you only get one shot at this....the tape is EXTREMELY sticky & you will bend your new visor if you try and reposition it once it sticks to the paint.Good Luck!Woodstockva
D**E
Was happy I could find this for my old ford 92
Easy to install. IDK how long it will hold yet. Looks good though.
M**I
Good product
Fits my single cab 94 f250
S**Y
Not Quite What They Used to Be
I have a 95 F150 that I purchased new and put these vent visors on 23 years ago. When I restored the truck last year, naturally I bought another set to replace the originals. In comparison to what they used to be, they've definitely been trimmed down and don't have the curled drip edge that they used to have along the lower edge. But they fit well and still function.....maybe not as well as the originals......but still acceptable.
D**D
AVS Is The Best!!!!
These were amazing! There really is no better maker of vent shades than AVS....I bought a few different off brands over the years. But I always end up with these. They always install in minutes without any issues, they look great, and they work great. One thing I find with other brands is they have to be trimmed, they don't want to fit right at all, or the mounting tape doesn't hold at all. With these you always know you are getting a quality product. Another good thing is the space....and I know it might not be a huge deal to some. But the last inferior set I bought only gave me about a half inch of clearance out past the window, so every time it rained if it had it the slightest bit below the shade, water came right in...with these you get a huge amount of clearance and unless it's a downpour I can usually roll my window almost halfway down and nothing comes in. I couldn't be happier with this purchase. Do yourself a favor and spend a few more dollars on something nice from AVS
D**S
Easy Install, great adhesive
Used on 1995 F-150 Easy install,; be careful it is positioned correctly as possible because adhesive is great but not meant to take on/off
C**D
You want these, you just don't know it yet.
Perfect! And great pricing. It can be hard to find in-channel wind shades, so I was real happy to finally come across these. Who wants to stick things ON the car?These fit perfectly, installed in minutes, and work well, not impeding the operation of my windows. I can leave the window open without rain or dust, and the car isn't stifling hot when it's been sitting in the sun.These are also almost must-haves for a new vehicle - all the plastic is toxic. You call leave your windows opened up help air all that out.
J**N
Great Product
Really easy install looks great allows ventilation without letting in all the rain. I live in Seattle this is a definite need.
J**S
Encajan a la perfección
Son un producto de primerísima calidad
J**L
Exactly as descibed.
Delivery was on time, well packaged with no damage. Very easy to install, make sure to clean surface with alcohol before applying and the two way tape will adhere properly. Just common sense. Gave my truck a really nice look and love that it cuts wind noise and prevents rain from entering truck on rainy days. Great product that deserves a 5 star rating.
J**E
Great fit
Quality product
P**E
Je recommande fit parfaitement
Livraison rapide et conforme à la description
Trustpilot
2 weeks ago
1 week ago