Mounting Dream Soundbar Mount Holds up to 15 LBS, Sound Bar TV Brackets with Adjustable Extension Arm, Soundbar Bracket Fits TV with VESA MAX 600x400mm, Detachable Sound Bar Mount

Like many people, I have mounted most of my TVs - articulating arms and static mounts.Recently I started buying sound bars for my outdoor TVs and my vacation rental properties.I purchased one of these brackets as a test. It worked perfectly, allowing the sound bar to pivot with the TV, instead of being mounted to the wall.It also allows my outdoor TV covers to also cover the sound bars.I did spray each of the bars with rustoleum paint before installing to ensure protection from water.I also like that you can determine the profile from the TV to the sound bar (some of my TV’s I remove the sound bars and bring them inside)Very quick and easy to install - especially in a new mounting. Existing mounted TVs require you to take the TV down, remove the bracket and reinstall.They do include slightly longer screws to accommodate the thickness of the sound bar brackets.

I wanted to write a review based on my application.This mount will work with a standard low profile tilt mount. All the pictures I could see show this working with a full motion mount or at least a mount that allows you to pull off the wall a bit.When using this product with a low profile tilt mount it gets quite a bit harder to adjust it to your perfect desired position as there is not much room to get behind and adjust.As you can see in the photos it is good enough but there is still a slight gap between the bar and the tv.All and all this is a solid solution and at a reasonable price.Hope this helps.

Mounted this on a 60 inch TCL tv and used this to install the TCL sound bar below the tv. The mount is solid. It was fairly simple to install. The sound bar is securely mounted to the tv with this. Only minor issue with this is bracketing has ribbing pressed into the metal and it would have been easier to install if it was totally flat. This mount gives you plenty of mounting options. I would buy it again.

The media could not be loaded.  Exactly what I needed, MOUNTING DREAM Sound Bar Mount HM5420. I recently purchased this sound bar bracket set along with the FITUEYES TV stand FT-S2601MB from AMAZON it’s an Amazon suggested accessory for those who are needing to mount their purchased sound bar to their TV. It did just that. Along with my new SONY X75H 4K 55”inch TV, I purchased the 2021 version SONY HT-SD35 sound bar. This was the 2nd sound bar system I’d owned in the last 14yrs. This one having the Bluetooth option that allows you to pair your phone device. The instructions for the sound bar bracket were simple and easy. I followed the provided instruction and installed the sound bar brackets along with the TV stand TV mounting brackets using the supplied Mounting Dream spacers I used the included parts/hardware that support the brackets installation to a sound bar with key hole mounting points. Attached the brackets with spacers underneath the TV stands TV mounting brackets then hung my TV to the stand and adjusted the sound bar brackets loosening then tightening the included adjustment knobs until the sound bar was hung to my exact preference and WOW what an improvement over the TV’s standard built in speakers . I’ve included some pics and video that display the end result and how great the sound bar sounds installed. Thank you , Mounting Dream for making a great easy to use sound bar mounting bracket.Nigel

Used to mount sound bar above tv, works well enough.

When the mounting system arrived, it didn't look large enough or sturdy enough. However, I was able to mount our new Polk soundbar to our 55" Samsung TV without too much trouble. Our soundbar has two keyhole mounting holes which were clearly designed to attach to a wall rather than a moveable mounting arm. After a couple attempts the whole thing went together and is quite solid. The kit comes with multiple different screws, spacers, and attachment hardware for all sorts of TV's and soundbars. My only slight complaint was that the longest part of the adjustable arms could stand to be a bit longer to reach across two sets of screw holes in the back of the TV and give more stable support. That's a minor problem, though, especially since most soundbars don't weigh more than 10 pounds.

This was one of the worst experiences I have ever had with the installation of a product. The directions are just terrible, so you're pretty much left to figure it out on your own. I finally got my soundbar attached to the TV, but I had to dig through my junk boxes to find parts. The spacers that come with the mount are either too short or too long. Same with many of the screws. It eventually worked out, but it was much more difficult than it needed to be, primarily because of the horrendous instructions and lack of sufficient parts.Edited to add: One advantage of this mount is that the hardware does include two flat-sided screws that fit the Polk Audio Signa S2 soundbar which has keyhole slots on the back. Those two screws would be almost impossible to find anywhere else.

This mounting system is a bit frustrating at first, but once you figure out how to make it work, it's pretty good. I ended up having to mount my sound on top of the TV because there's a half-inch lip on the bottom that the mounting bars couldn't get around. I also used the spacers to make the mounting bars work with my TV mounts bars.Don't give up! Just think outside the box.