Heeqinn 1/4" Irrigation Hose Clamp, Firm and Leak-Proof, Easy to Install, Solution for Leaking of Drip Irrigation Kit Connector, Irrigation Fit, Irrigation part, 100pcs

It works as expected.

The media could not be loaded. Works with my 25ml buck from yo dabs, its super nice have a big bag of these I never having to buy these agin. Great for extra dab parts for your Enail. I used them on a 6 warp coil, and a 4 warp coil with out any issues they stay in place, having these's gives me a peace of mind, safe dabing is better dabing. But using it in conjunction with some velcro straps to elevate the wight on your enail joints is better. 2 points to take off wight is better than just relying 1 point with just the Hose Clamp stand alone, Redundancy in safety just in case the Hose Clamp fails. I highly highly recommended it. 5 stars :)

I hate fittings that don't use mechanical holds. I ran aquariums for a few years and now do indoor gardening, so I've experienced enough poorly designed fittings to accidentally fill a swimming pool. 1/4" connections are notoriously bad since the barbs are so small and the pressure has to be kept light to avoid breakage.This tiny guys help offset reliability problems with 1/4" connections. They are ideal when you can get the clip over the back of the barbs and on to the tubing that overlaps the last barb. Better than a blast with a heat gun at keeping that tubing edge cinched down on the barbs.However, these clips have very little additional room when fully opened so I have not been able to properly secure several types of fittings. In those cases, I usually squeeze one open as much as possible and then try to shove it onto the front cone of the fitting to at least get some friction on that part. I also have to use pliers with working with them as I simply cannot get a decent pinching grip on that level of tinyness, not to mention the shooting pains in the fingertips from trying.Recommended. While they don't fit all uses of 1/4" barbs, these clips are incredibly useful for improving the reliability of the fittings that they can accommodate. Anyone who uses 1/4" tubing would benefit from keeping the tiny package of these around.

great clamps

They work good

I'm sure these clamps work fine for some things. I was using them as a hose clamp around plastic tubing to a water-fed machine. When I turned the valve on the machine off, the clamp failed to hold and the tube leaked. THESE CLAMPS WILL PROBABLY WORK FINE IF THEY ARE NOT UNDER PRESSURE.

Super easy to install and did exactly what its intended to.

After a few 1/4 inch irrigation connections blew on me, I looked for inexpensive clamps to hold them tight. These do the job. You need to us pliers to put them in place — they are too sharp to squeeze with your fingers.

Auto -hose lave glace

Very happy

Very happy good secure fit. Stopped my drippers for my irrigation from popping off the hose.

These clamps are required to prevent the tubing from blowing from the water diffusers.

Great idea, works really well, can be difficult if you have issues handling very small items