goldenwarmCabinet Handle Template Drill Mounting Template (1 Pack) - HDTM160 Template Guide for Cabinet Knobs, Drawer Pulls,Cabinet Hardware

Awesome guide. The 3 in the picture are the first handles i have ever installed. I don't do this for a living and kinda said to myself it I get this wrong then who cares. But the guide helped a lot. I used the 102mm (4in) guide for my 4in handles. I measured and re measured to make sure the guide was accurate. I had to do the bot with my pencil at the bottom of thw bottom 102mm circle and a dot at the top of the top 102mm circle. The top screw came a little bit off at an angle but not significant enough to cause problems. Once I tighten the screw with little to none toque it fit perfectly. The end result is what I was looking for not the process so I am happy with this guide.

Template is good, it’s just a template. Don’t bother using the provided drill bit... I did because it seemed like the standard cabinet hardware size. It broke on the first drill, then the bit broke again trying to twist it out with pliers, then I had to punch it out. Now it’s in 3 pieces in the trash.

Really easy. It made holes in exact spots and it was very simple to do.Only thing I think they should do to make this actually perfect for these projects is to make it a lot stiffer. Shouldn't bend much at all. That would make lining up and staying in place easier as you're making slight adjustments. Having this plastic be able to bend so easily never was a positive. Yet again, it does what you want. Measure twice and drill once.

These are very well made, look very classy and the length is perfect on tall, top 42" cabinets. I love the feel and if they wear as well as they look - this will be a great purchase!! We did have to buy a new hole template to drill the cabinets as this is not a standard size, but well worth it.

Don't use the bit It works but mine was bent so im sure all my holes are way bigger then a 3/16 bit hole size go to your local store that sells bits and get a better quality one best advantage to reading this Is you will have a nice clean hole not a wobble one like I ended up with.

I use these to install long handles horizontally on my drawers and vertically on my cabinet doors. It worked great for the horizontal installation. But the vertical installation did not have the right measurement. I had to figure out how to center

This little template saved me hours of work measuring. Totally worth it. All of the handles in my new kitchen lined up great. If you have the handles that are super large this won’t work for you but for average size handles it’s great.

I 100% love this tool. It saves me so much time in installing cup pulls and cabinet pulls. I have flexibility to customize the location as there are plenty of holes in the template to accommodate spacing for various pulls as well as location on the drawer / cabinet face.

Love this tool. Makes putting new handles on straight and with the correct spacing much easier than just a tape measure. The included drill bit is great as well. No guessing what size to use. Also the sharp point on the bit is perfect for making sure you are in the correct spot before drilling. As a furniture rehabber this will be indispensable for me.

Bought this for the new cupboards we were putting in our rental property that we were selling. We did a lot of the work ourselves so we wanted to get it right. The only problem we had was with a larger size drawer. To get the pull right in the middle I found the template wasn't large enough. We just measured to the middle.Other than that it was awesome to use and came with it's own drill bit

Template works just fine for low budget. So Long as you want your handles near the top of the drawer.

This made finishing our cabinets a breeze. Highly recommend this product.

gabarit parfait pour mes poignées.. le seul bémol est la mèche qui donne avec. elle est cassé en deux, le temps de le dire mais bon j'achetais pas pour ça.