for Samsung Galaxy A10e Screen Replacement

Screen worked great, fairly easy installation. Having the frame already installed made things less complicated. Just be careful removing your battery, it's really difficult to remove

I replaced two of my son's screens thay came out beautifully. They worked out so well.

1) The screen itself and digitizer seemed to work great in the 2 hours since installation.2) The installation is a little tricky (especially prying the old battery out) but that's Samsung's fault, not the fault of this product (just try not to deform the battery)3) The frame is a VERY close replacement but not perfect. We found two tabs on the Samsung A10e parts that had no slot on the replacement frame. You should probably use a Dremel but we used a utility knife to cut off the tabs without a problem.4) There are a couple places in the old frame that have adhesive that is just missing on the new frame. It would have been a closer fit if the adhesive strips were already applied to the new frame for a complete kit.Overall, it took about 2 hours for my 16 year old move the guts into the new frame and he successfully replaced the broken screen & digitizer with this kit.I'd probably buy this kit again if we break another A10e screen.

Installed it ASAP. Product fried my mother board at least Nothing was on phone important brand new till screen went.past warranty . Bought this all parts fit transferred over no problem. But heated motherboard bad . Stopped now . Now was a good phone now ended as a lost of money. This and phone. Ugh

So this will fit an A10E, " however".......you will need to dremel about 2mm off of a plastic lip right near the 3.5 headset Jack input. That lip on the frame is just plastic, but it prevents the bottom cover from being screwed down flush. Therefore it will prevent back cover from sealing unless tab in way is dremeled off.OEM samsung frame with lcd that this ztooyo is replacing, does not have this small lip I'm referring to. See pics.Pics are of original broken lcd, not replacement.Pics are showing you with white pen where replacement frame by ztooyo has the lip I needed to dremel. Dont let this scare you. Easy breezy to remove.Bottom line, dremel 2mm off lip making it flat with frame or it will not seat flush.Do this b4 you even start removing hardware. Compare your oem with the new replacement frame at that 3.5 headset jack to see if yours is same like my A10E.Tips watch youtube vids to orient yourself. Dont order just lcd, order this one with the frame. Heat lcd side where battery is to loosen glue on broken lcd. Use old credit card style shim to get behind battery. Careful battery can be easily damaged.There are 6 screws holding top cover. One screw holding motherboard under cover.7 screws hold bottom cover, one screw holding board under bottom cover.Swapping components is straight forward via youtube video replacing A10E lcd with frame. Just be delicate when prying components.

It's perfect

Just what I needed. It was easy and fast to swap LCD screens with this kit. Recommend this one for Samsung Galaxy a10e

Works as expected. The person that asked me to fix their phone was extremely happy with the results.

Rien à signalé. ...