FOXSMART 329670 PLA 3D Printer Filament 1kg Spool - 1.75mm - White

A BIG Thanks goes to the other 5 reviewers that rated this WONDERFUL filament 5 stars. This is why I chose the FoxSmart.I also bought 3 other rolls.I bought a Robo3D R1 Plus and this filament prints like a dream. Tested on STOCK system with no mods except the Printed Solid XXL Controller.I have a very accurate Digital caliper (because I read all the reviews for the calipers too and choose well) and this filament measures the most accurate of all the filament I have bought thus far.NOT even one pop in 20+ hours of printing (good dry filament without moisture issues) and consistent diameter throughout the rollbeing that this product is also priced well, I think it's safe to say that FoxSmart will become my ONLY provider my filament.I used 199C nozzle temp and 80C Bed temp for this filament.I tested this filament up to 230C (Way too hot) and it still printed pretty darn good! At 70C on the bed I got some lifting on a corner but raising the bed temp to 80C and 100 RPM on my !stock! cooling fan solved this.

After getting this recommended on a 3D printing FB page I bought some. I had always been a huge Hatchbox fan, but this stuff is incredible. I print on a Robo 3D R1 with no upgrades and it prints like a dream. I print at 210C and I usually print on tape so the bed is not heated when I am printing. It is so consistent and it prints better than any other filament I have tried. I will continue to buy this as they have made a believer out of me. I will buy it here or direct from their website as Amazon doesn't seem to always have it in stock.

Spooled by a 5 year old. Before first use I tried to untangle as best I could but after an hour this filament got stuck in the spool and almost broke my printer. Just saw the Amazon warning popping up saying this item is under review. I should have noticed description says "#1 filament on amazon" but it has only one to three review per color. Also, the spool diameter is tiny, with tiny holes compared to my other filaments. I would stay away from this design.

Fantastic filament! No jams, feeds perfectly in my Prusa i3 with Mk 8 extruder. I thought my extruder had issues, but after using this, I checked out my other filament and found the reason for the jams was intermittent bulges! I bought two more spools of FoxSmart PLA (Blue and Orange), and so far, the Blue is just as great as the white (haven't tried the Orange yet). I'm watching for the Black to get back in-stock so I can order some.

So out of 2 rolls of this so far, it is the worst printing filament that I have come across. Inconsistent size makes very noticeable lines in prints. Prints also likes to curl due to poor thermal properties, and it only seems to print at all a MUCH higher temperatures than everything else. I'm not yet certain, but some clogs with this filament have made me suspect some particulate or impurities may be present as well. Avoid.

This stuff printed very nearly as well as the Printrbot branded stuff in my Simple Metal, although I set the heat slightly higher to 213 degrees C instead of the 208 I used with the Printrbot material. For some longer, narrow prints I think I got a little more warping than with the name brand stuff, but that was easily fixed by printing with a brim. For the price I'm willing to have to put a brim on my prints, this is the only kind of filament I will be buying from here on out. They shipped it swiftly and it works very well, I highly recommend it for any other Printrbot users out there.

I've printed almost the entire kilo, and will be purchasing more. This stuff rocks.The spool is a bit tight on my holder, but applying a few drops of any oil (seriously; I'm using olive oil) ensures a smooth, easy movement.

I have 6 rolls six different colors and I can't get one decent print from this stuff. I've tried everything and I still get voids in solid infill and interlayer adhesion problems. Yet pop in any one of the other colors and they work just fine