36pcs 6mil Blank Stencil Material, 12 x 12inch, Milky Translucent- Make Your own Stencil

I didn't need quite this size but they work and the price and quantity were what I went with. They are easy to cut with an Xacto knife to make my own stencils

I purchased this to make stencils for paper crafting. It works perfectly! I used my Cricut Explore Air 2 (Used stencil setting with double cut) and also tried with my silhouette cameo (also used stencil setting, but had to change to 3 passes). Made perfect stencils with both machines! Will definitely come back for more when I run out of it. Great price too!

I bought this to make stencils and wreath builders and it works beautifully. Let me answer some questions I had before and after I bought this: For the Cricut Air Explore 2, I placed the setting at custom material, chose stencil (4mm), and changed the "default" pressure to "more" -- and it cut the first time. You don't need the deep cut blade, I used the regular blade, but the deep cut would work too. Before I changed the default to "more," I had to cut it twice [pro tip, if it doesn't cut through the first time, do NOT unload your mat from the machine, instead press the "GO" button again and wait a few seconds and it will RECUT exactly in the same place!]. For the Gemini Jr., add your metal shim (the one for intricate cuts). I made a grass/cloud/hill/fence stencil and I love it (see pics!). One note, for the wreath builder, the material was not quite thick enough for my liking (it's ever so slightly thinner than the Gina K.), so I cut a thick cardstock (110 lb Neenah) to place under it and glued them together. Now it's better than what you can buy in stores, imho. Hope this helps!

I use this product for creating stencils. I use it with the suggested plastic/wood burning machine. It is great for stencils but since i use it for Facepainting stencils I noticed it is a little on the thicker side. When I looked up the right plastic to use i was told to go with 4mil for face stencils but purchased this as 6mil to stay on the safer side. Even though 6mil is great and works i do notice the slight difference if i would have gone with thinner plastic. Its perfect for stencil making though and the price is good compared to craft stores.

The stencil blanks I ordered are exactly what I needed. The work well with my Silhouette Cameo 3 and are easy to cut. They are very flexible and hold are durable edge for fine stencil lines.

Product came quickly & in good conditionI bought it to make stencils with a Cricut machine and it works great. Do some testing with a small shape to cut out to find the proper settings first. I used (transparency and 2 passes)

I was skeptical after reading product reviews because they were hit or miss if this material would work on cricut maker. This is what worked for me and it cut great.1. Create a custom material:Stencil 6milpressure 350(Only do 1 pass do not turn on to do any more)Deep Point Blade ( this blade works great)2. Use the purple strong grip mat. Use a roller to make sure it is adhered to the mat. Then use painters tape as shown in the first picture and tape all sides. (I tried other mats even with tape and the inside of the stencil shifted after cut. Please don't it jammed my machine. Not fun)3. Then cut your stencil.

I cut these sheets into stencils to use in card making. Good quality sheets, sturdy but cuts well on my Cricut cutting machine. Great price for the quality and quality of this product, fast delivery of product.