K001 V3 Antenna Pole Mount, Upgraded Ribbed Bracket Combine with Double U-Bolts 12" Longer 2mm Thicker Pole for Outside Home Antenna Installation

I ordered 2 of these pole mounts for a pair of wireless transmitters (MikroTik Wireless Wire Cube) and didn't have any issues installing them. The mounting bracket has 6 screw holes (screws not included), which provides a sturdy foundation for the poles. The double u-bolts also adds to the stability of each pole, even though my devices only include a single u-bolt for fastening. The poles themselves are not that thick, but my devices aren't that heavy so I didn't need to tighten them too much in order to securely mount them. We had a heavy windstorm recently, and both poles didn't have any issues surviving 60mph (~97kph) winds. Overall, I'm happy with this product for the quality and price.

I have the starlink long wall mount for my starlink dish but I need a little more height to clear obstructions. I ordered this mount and it worked great for me though the install doesn't look at neat as I would like it to. No fault of either product they just weren't meant to go together. The end of the pole from the rectangular gen 2 satellite dish will fit inside this mount. I placed a self tapping screw in the side of this mount to secure the starlink pole to it since of course it wasn't built for the starlink dish. The ribbed bracket I mounted to the side of the starlink mount coming out from the side of the house. Self tapping screws with thread lock and lock washers. It gave me the little bit more height that I needed to get clear of obstructions for my starlink internet.

It works well, solid connection to the wooden strut. The right angled metal is a little thinner than it should be and has more flex than it should. Not a big deal if you don’t live in a place with lots of wind storms.

So happy to find these mounting brackets. I needed them to hold an existing pole 4" away from the extended wall on my house. The roof overhang presented a problem with that. These brackets were perfect fit and are very sturdy. They fit perfect on the 3" molding. I had an existing pole that was 1/4" smaller than the 12" pole that came with the bracket. I put the existing pole through those 12" pipe and then I attatched zipties below and above the pole to keep them from sliding around and another zip tie in the middle which housed the cable line on the outside of the pole. I had an existing bracket that fit on the trim below the roof where the soffit is and it was really secure. If I need to adjust the antenna I can turn it because of the 12" poles allow me to do that.

It arrived with all the pieces/parts in the package as pictured. Straightforward install. It’s supporting my gmrs antenna for my base station and doesn’t show any signs of sagging or premature failure (just made a visual inspection approximately 90days after install) has withstood wind gusts up to 45mph with a total antenna weight of around 3 pounds. A longer pole would be nice to raise the total height but I know that would cost extra $

This is easy to install and will hold up light items. The bracket itself is not very sturdy so if you want to swap out the included short pipe that comes with it for a longer one you will need to brace it or get a second bracket to keep it from flexing.

The mount seemed to be high quality to me. The bracket did have some flex to it as other reviewers have noted, however in my case it was insignificant. Under 30+ mph gusts, there was a slight rocking, but nothing that interfered with the instrument. This definitely beats the way I had it installed previously. This is an AmbientWeather WS-2902 that I mounted with this device.

...so far for my purposes. As other reviewers have written, the bracket is flimsy, the tube walls are thin, and the finish may not last.

H have this on the side of the house holding a Cell Phone Booster Antenna. Well made and quite sturdy for my needs. Not sure why others are saying otherwise, because this is a great unit and at a good price.

Was impressed with the quality. Installed nicely. Hopefully will stand up to the outdoor elements.

Well constructed and no complains. Would have been nice for the $30 price tag to include the screws and plugs for the wall mounting bracket.

The bracket on this does not inspire confidence. Thin aluminum. The pole is the perfect size for your Gen2 Starlink. Even with the skimpy bracket, I had the starlink up on this for a winter and it did not fall so I guess the bracket isn't too bad.

Pour installer station météo