Energetic 5/6 Inch 5CCT LED Recessed Light, 2700K-6500K Selectable Downlight, Can Lights with Baffle Trim, CRI 90, Wet Rated, E26 Base, 10.5W=85W, Dimmable, Simple Retrofit Installation, ETL, 6 Pack

Exchanged my halogen bulbs for these retrofit LED lights. Boy are they nice. Has warmness setting for the brightness of the lamps. Love using them really makes my bathroom bright.

UPDATE: I've had these installed for several weeks and I am still quite happy. I just recently added a Lutron Caseta smart dimmer control to control six of these bulbs in my kitchen. I am happy to report that these bulbs work perfectly--no humming, buzzing, or flickering. Perfect. Lutron Caseta has a list of bulbs approved for use with Caseta and these are not on the list, but I can confirm that they do work perfectly in my application.There are so many choices in this lighting category that it's hard to make a decision. This product had good reviews and the price was right so I decided to give it a try. I just received the product and I immediately set out to install them. It's a pretty easy, straightforward process. The lights come with two different kind of attachments--the clip style which is installed and the spring loaded style. Your existing cans will dictate which type you will need to use. Mine use the spring loaded type which means that I had to remove the clips and install the spring type. Takes two-three minutes per light to change using a screwdriver. No big deal. Once the clips are installed, just connect the included E26 screw in adapter, connect to the light fixture and pop it into the recess. The springs are very stiff and I found it easier to latch one side at a time. Very simple install.A few notes. These lights fit both 5" and 6" recessed cans. The attachments can be adjusted to fit either size. The lens/bulb on this light is about four inches and the rest of the fixture all trim so it looks much smaller and sleeker than the original bulb style. I think it adds a more contemporary look. The trim is actually metal which is nice. So many of these are all plastic which can fade and yellow over time. I like that these are metal as it gives them a quality feel over plastic. The kelvin color can be adjusted with a switch located on the top of each light. This is a really nice feature since it's hard to know exactly which color is best for your location. I tried each setting BEFORE seating the light into the recess otherwise it's a bit of a pain to access it. It's not something you are likely to change often, but it's nice to know that you can. If you want to control this remotely, you will need to spend 4x as much for a smart bulb. Not necessary in this case.Overall, great product, excellent value. Fast shipping as always with Prime. Cannot comment on longevity as they are new, but I expect I will get my monies worth.

If you have the right sort of existing pot light fixtures already installed, these LED bulbs are simple to install. My current pot lights have a "stepped" and tapered interior (see photo - black arrow denotes the "steps" inside my pot light fixtures) and the springs that come attached to these replacement LED lights goes right into place very snugly. If the interior of your existing pot light fixtures is curved and smooth, it could be an issue to install - every situation varies.The 5 way light adjustment switch on these LED's works phenomenally so you can dial in any ambiance you want or change the setting in seconds if needed.Prior replacement of another brand of LED lights (NOT these LED's!) I've used in pot lights required me to screw the LED bezel to the existing pot light in two places and that's a real pain, especially considering that I'm changing out 46 pot light bulbs!The first photo on the left shows the new LED lights on the brightest setting. The second photo on the right show the "steps" in my existing pot light fixtures that allows the LED light springs to catch and hold the new LED's in place.I really like the ease of installation and the adjustable Kelvin output switch on these LED's - very well done!! As I mentioned, your experience may vary - good luck and I hope this review helps!

A very easy and cost-effective upgrade; definitely nice overall, especially the ability to select the light "temperature."The only problem I ran into was that these lights wouldn't push all the way up into our metal canisters; the tension against the metal walls inside was pushing them back out about a quarter-inch so that they weren't flush with the ceiling and looked terrible.The solution was to bend the interior metal prongs inward very slightly, so that their total diameter was a bit smaller. These metal prongs are quite thick, so this required pliers and some serious elbow grease - but once I did that, they pushed nicely all the way up into the canisters. (They are adjustable between 5" and 6" diameter, but I only needed about an eighth of an inch smaller than 6".)As others have mentioned, there is about a half-second delay between switching these on and their actually coming on. I agree this is slightly weird, but I don't understand why people are annoyed by it. Mindfulness meditation may help those with such a temperament.

These worked perfect. I finally found a set that fit well and as a bonus they were easy to install. Pulled the old lights and cans out and these slid right in without an issues or concerns. I selected the "temperature' of the bulbs and just slid them up into the cans. That simple.

WOW!!!! I love these!!! Really updated my kitchen. GREAT with selectable brightness and color of light. Best part they save on energy and stay really cool to touch. Less fire risk.

The lights were a bright white 5000k, and the nightlight ( outer ring light) looked good as well. I bought some for upstairs too. I did have to buy two new dimmer switches so they would work good. If you don't, the lights will not cooperate and some will have the light, and others will be the outer ring dim light. No flicker issues.

Great price

It's a 5 star!

Replaced my old pot lights with these. I wasn't sure of the quality, given it's Amazon, but these lights were solid. I liked the ability to choose the colour temperature, and the install took all of 2 minutes each. The lights work perfectly and look great. Would definitely recommend!

Updated these LED light from my old 6" portlight. The instruction are NOT very good but it look very simple to install, except if put the spring inside the old housing it will not sit flashed again the ceiling like some other reviewer mentioned. You need to put the spring in-between 2 small clips inside the housing so it will sit tight again it. If you don't see the small clips, you may need to bend the clips out 90 dec. with a flat head screw driver, in most case you properly need too do that.

Look nice and work great. Easy to install.

A great kit, adjustable colour temperature lets you choose exactly what you want.