BEAMTECH H11 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh H8 H9 CSP Chips Conversion Kit

Muy fácil de instalar (me tomo menos de 30 min), y no presentó ningún testigo en mi en mi auto. Se nota muy buena calidad de materiales y alumbra tal como se podría esperar, se puede decir que tiene muy buena relación calidad-precio.Espero en durabilidad también cumpla con las expectativas.

Just a preface... I am using these in my 2017 Honda Accord EX-L Coupe for low beams only. I already had LED H11 Headlights previously installed 2 years ago.. I believe its chip controlled so you can jut swap out the halogens...but...READ YOUR VEHICLE INSTALLATION AND PLUG SUPPLIED INFO FIRST. You may need a new LED capable wire harness and/or plug. I did not.At any rate, the search for these 25W each H11 LED's at 6500k (kelvin, or brightness color) was relatively painless. I saw a set with lots of buyers and reviews from a company called BEAMTECH. Again, they have great reviews, the product looked to be exactly what I needed and the price was right. I ordered this set right then and there. My passenger side LED blew and was unusable. Upon ordering I knew I would replace both sides for a perfect match (and to keep all voltage compatible).I received my package well padded within 2 days with Amazon Prime, as usual. After receiving the item I inspected it and HOPED this would be a straight replacement (would fit the adapter I currently use). I also hoped that at 6500k (the chosen white color) it would match what I previously had in there. To my great delight, IT DID!The following day I set out to do the installation myself, I'm OK with replacing bulbs, air filters and such. I know a little bit about cars. I popped the hood on a hot, humid 85 degree morning. I knew where the proper plugs were already so it was only a matter of removing the old one's first (5 Mins.) Next I opened the new LED's box and once again was very pleased with the quality of the unit and the packaging. The wiring harness was the exact match from old ones to new! I then installed both sides(5 Mins.). Check the operation of the new LED's first BEFORE mounting and inserrting them back into the headlight fixture. I checked and left was on but right wasn't. No big deal there as I already knew LED's ARE polarity (positive & negative) specific so if the LED does not turn on. Just have to reverse the harness plug and bulb to set the polarity correct. VERY EASY. BAM! They both turned on, looked GREAT, AND matched all the other LED's I have installed (fog lights, running lights and high beams are all LED). After mounting the new bulbs back in the headlight enclosure, I was very pleased. They fit perfect and looked great! After the install I lowered the hood, turned on all of my headlights, fogs, and rear again. It really matched perfectly and even drew a clean beam output perfectly on the road. So all in all, tops a 20 minute job! Saved a ton of cash doing it myself too.I then packed everything back up, shutdown the car and back into the AC I went.I want to tell you this...I am so happy beyond words when a plan comes together as easy as this did. I knew I could get pulled over and get a ticket for something this trivial and wasn't willing to take that chance. I barely broke a sweat. So hats off to you BEAMTECH, you have another happy customer! GREAT PRODUCT! Will definitely recommend and come back when I need more.

Installed a few months ago and the quality is great. Was worried the colours might be too much on the cooler blue side but it’s perfect.

I’ve had a set of Supernova SV4’s in my F150 for a couple years now, spent over $300 on them, less than a year the passenger side diode went out, which was really disappointing, so I emailed the website I originally bought them from, they were great and sent me a new bulb free of charge, the problem continued though as the drivers side diode went out a few months later so I emailed them again and they sent me ANOTHER bulb free of charge which was very unexpected and appreciated. With that being said it’s been over a year now and the passenger side bulb is starting to go out again so I got to thinking… when I initially bought those $320 LED’s I also bought a set of $25 Beamtech fog lights and those were STILL RUNNING AS BRIGHT AS NEW to this day! So I decided to go on Amazon and see what type of low beam bulbs Beamtech offers and I stumbled upon these… a fanless, compact, easy to install in-line bulb that doesn’t need a canbus, so I took the risk and bought them, I figured these are only $40 so they can’t be THAT bright and probably have a really shifty beam pattern, but if they don’t work out at least they didn’t cost as much as a car payment.So I put them in, installation was a breeze, build quality is top notch and they pack a little weight to them which was encouraging, the fit was perfect into the H11 housing too. I waited until night to go for a drive and WOW!!! These are absolutely OUTSTANDING!! I would have never guessed something this small with no fan could be SO POWERFUL AND BRIGHT! These are almost just as bright as my SV4’s lights, beam pattern was SPOT ON, no hot spots and absolutely SILENT. Can’t beat it for this price. If you’re stuck between these and another brand, I would HIGHLY recommend giving these a shot.

El foco cumplió con su función, no es el más brillante, ni el más fiel a la línea de corte de luz del faro, es un poco dispersa, en general cumplió su trabajo por el precio, la durabilidad es cuestionable, me duró, poco menos de un año, antes de que uno de los lados del foco se apagara y otro quedara a luz media, lo recomiendo si el presupuesto es poco, pero si existe la posibilidad de subirlo un poco más, hay mejores opciones.