32OZ Epoxy Resin and Hardener Kit Crystal Clear for Jewelry DIY Art Crafts Cast Coating Wood,Easy Cast Resin with 4pcs Sticks,2pcs Graduated Cups, 2 Pairs Gloves,1 Instructions

This it’s my first time using epoxy resin, this brand it’s great, little to no smell, cure time and the finish product it’s great. It does take 24 hours depending of how big it’s the project. But the final product it’s amazing, cleaning it’s so easy, make sure always used gloves and a mask even though has a low smell to nothing. I highly recommended. Great quality. I will purchase more

Me encantó la resina, facil de usar, muy pocas burbujas y poco olor. Secado en menos de 24 horas y muy cristalina.Love this resin, easy to use, few bubbles, dry less than 24 hours, very cristal. Very happy!!!

The product takes at least 24 hours to cure in order for you to handle it on bigger projects like coasters and trays. It also has a strong chemical smell that other products I have used don’t. It is easy to work with and does dry pretty clear. It is adorable but I will not be buying this particular product again.

This was the first time I have done this. Never used another product before. I bought it to put a clear coat over a canvas print. I mixed it following the directions until I couldn't see anymore swirls. Poured it over the canvas and let it spread out, moved it some with a flat metal thing until everything looked covered and even. Then used a heat gun over it a few times to remove as many bubbles as I could see. I'm extremely happy with the result. It's solid and looks professional. I left it to dry over night and by morning it was good to go. I could see that the pieces left on the plastic were bendable. But still pretty strong. If you made this into a block or ball or anything thick you wouldn't be able to bend it. It turned out fantastic and was super easy imo. I'll be using this again when I do something like this again. Unless I can get a larger ammount at a better price or something. I have no problems with this brand.

The media could not be loaded.  I LOVE at his resin. It’s the only one I use. Very user & beginner friendly. 1:1 ratio never had a issue as long a proportions are equal & you make sure mixture is stirred properly so it binds together. Self leveling & dries fast. Low to no odor & the price point is good for the product. Little to no bubbles in finished project. Make sure to use a torch or heater to pop bubbles in projects. To the people complaining about it not drying are doing something wrong. I have had spots that took longer to dry but that’s because of the ink that was used wasn’t stirred properly. If this resin is not equally measured & stirred properly it’s not going to perform well. I’ve been using this resin for about a yr and in the beginning when it didn’t perform well (which wasn’t often maybe once or twice) it was operator error. As long as you follow the directions properly you won’t have any issues. If your product is getting stuck in the mold it’s more than likely the mold. Some molds may need to be treated before use.

Very easy to work with and beautifully clear

Definitely not for beginners.While this product claims to have no bubbles, even if you stir precisely as they describe (which I did), you end up still with a cup of nothing but bubbles more often than not.But that's ok. It's best to pour this in thin layers, popping the bubbles with each layer if you're doing clear. If you're using color, doesn't really matter, I guess.There's an up and down side to it's quick cure time. On the upside - it's quick. You can demold your item by the end of the day if you pour it in the morning.However I do not recommend this for beginners at all. You have a very short window to play with. Once it begins getting warm it gets very hot very quick and cures very quickly. Even after doing the initial stir for the mixture then adding it to say two cups with the mica coloring, It's already beginning to cure and thicken. Which is good and bad depending on what you're using it for. That's why I say it is not good for beginners. Definitely for people who know what they're doing.One of the good things I discovered accidentally was, even after it seems like it's too thick to use you can still glob it into your mold, even mix a color into it while it's really thick and globby. Depending on the texture, it will more than likely still level out and still come out with a desired result.I had a quarter ounce left in a cup that I didn't realize was still there. It had sat there for more than twice the amount of time I normally had to do a poor. I grabbed it to pull my stir stick out of it to salvage that at least, discovered it was still workable - kind of like thin playdough/ something. So I attempted to toss it into one of my larger molds and see what it would do.An hour later when I went up till check on it, it had leveled out and conformed to the shape of the mold. When I popped it out the next day, as I did this poor right before bed, there were no gaps or bubbles or cracks or anything. It filled up the entire mold nicely.I only suggest absolutely wearing gloves as when it gets to that thick, sticky, messy point - it can get really sticky and messy.Also tie your hair back. If you have long hair you definitely do not want any accidental dippings into these cups.I do wish that they gave at least 1-2 ounces of the B hardener extra. I have the A bottles from several different brands which contain approximately 2 oz left over. But I don't have any B hardener. I and others have tried, but we cannot  purchase the B hardener separately. So I have a collection of approximately 7 or 8 different bottles of the A bottle with approximately 2 oz 1 to 2 oz remaining hoping for one day.

Follow the directions as listed and you will get a perfectly clear finished product. I'm a beginner and the ease of use was great !!

I loved this, first timer! Put on my custom cornhole boards, easy to do with painters tape, file for the edges! Simply mixed together, if you're careful, stay away from bubbles, or you'll need a heat gun, or something to remove the bubbling. 10/10 for my experience!No rating for easy to remove because I have yet to remove, as I don't need to yet.

Je ne sais pas ce que nous faisons de différent avec la résine, car nous avons utilisé la même marque, mais en format plus petit et tout allait bien avec la résine. Depuis que nous utilisons celle-ci, rien ne durcit correctement. Nous n’avons pas changer dans notre méthode. Donc je suis déçue. Mais peut-être y a -t’il une explication. Je ne suis pas satisfaite.

This resin was so easy to use. My niece and I had a ball working with it and making some very cute things. Follow the directions and you cant go wrong. Be sure to stir it enough, for one batch we did not and it did not set right. Our mistake. After that it went very well. Loved it and will buy it again as I have a few more things I want to make.

Used to create bookmarks and keychains, will probably go back to Let’s Resin’s resin for the quicker cure time. Being new to this craft I don’t have many silicone molds so need a quick turn around time.

I'm not at my first project and this is by far the worst epoxy I have ever use. It separated itself to form big holes without epoxy in it.Never again!