XFORT® Adjustable Roller Catch, Polished Brass Roller Ball Door Latch, Door Closer When Locking is not Required, Ideal Internal Door Catch for Doors, Cupboards, Cabinets and Wardrobes

Perfect for our needs for our elderly Father to be able to close the door without having to manage quite a difficult door handle to open and close. Very easy to fit and adjust with the instructions even for a novice like myself!

Adjust with a LARGE SCREWDRIVER. The larger the Screwdriver the less the roller will be damaged when adjusting its position. The instructions aren't rhe best but stick a large Screwdriver into the slot in the roller and turn it to make the roller move in and out. The first one of these rollers I fitted gets stuck when the door is closed as the roller now has burrs on it which sticks inside the mechanism. The burrs are from using a screwdriver that was too small for the job. The door also opens when their is positive pressure from the outside door closing. This is because the spring inside isn't very strong so the door is very easily opened. I think this would work better on a door that had the door frame closer to the door itself. But our doors are a lot smaller than the door frames so it's not the best.

This was a carefully-thought through unit which worked really well. It was well-designed and I particularly like the way you could adjust how far out the catch came from the body of the lock; it was very easy indeed to adjust. I got two complete units in my purchase and I think that they were very good quality and very good value for money.

This does the job, but it is severely let down by the very poor quality phillips-head screws included. My electric screwdriver mangled the heads of two screws in moments halfway in and I had to get pliers to take both out, and buy some good quality flat-head screws which did the job.The other problem is no instructions on how to adjust the protruding end of the roller (just a cryptic "+ adjust -" on the metal). There was ample place to put a quick instruction on the packet (even on the paper sticker label).After searching to find another similar product on another website it is fairly simple - there is a slot in the plastic head of the roller. Use a flat head screwdriver in this slot to push the roller back into the unit and turn clockwise to reduce the protrusion, or counter-clockwise to increase it again. You need to turn the head a whole 360 degrees to change it one step. You can do it again for another reduction. I needed 3 rotations until it was just right.

Useful, adjustable roller catches for internal doors. Fits and works well but one striker plate is rusty and tainted. As this has now been fitted unwilling to return the whole package - perhaps a replacement striker plate can be sent? UPDATE. Supplier acted on faulty part and sent a replacement. 100% customer service. I would recommend this supplier for that. Thank you

I have arthritis in my hands so fitted this on my bedroom door. The roller being plastic broke in no time as did the metal holding it. Should have read the reviews before buying but thought no need it will be fine. Wrong!! Returned and not bothered getting a replacement as so bad. Managed to get a better latch a cheaper price. Don't buy.

Bought this for our cloak room under the stairs. I had no idea of the gap between door and frame once installed. It is very intuitive to install and adjust, so it worked a treat. It has a smooth action when opening and closing, plus it stays firmly closed.Not much else to say. It does the job.

They are ok but a little stiff when applied. I’m not sure I would buy again and hope I don’t need to

um eine Tür ohne Klinke zu schließen