GAsupply 2" Rear Leveling Lift Kits,Compatible with 2004-2020 Ford F150 2WD 4WD, 2 Inch Forged Aluminum Block with Extended U Bolts

I bought a 2009 Honda Civic Si sedan from a kid because I was driving 100+ miles a day for work and wanted to obtain some better fuel economy. After doing standard routine maintenance, plugs, oil, filters, brakes, etc. I addressed the suspension. The car was sitting super low. After maxing out the aftermarket coilovers that were already on it, it still sat way too low. After measuring some things, I ordered these...Here are my thoughts:They came quickly, packaged appropriately, and dropped right in. These are solid billet, heavy and kinda sexy.To be clear, I did not have to do any sort of modification to these or to the car to use them. I simply unbolted the sway bars and other associated nonsense to drop the lower control arms down and put them in place.Once this was done, the car sits semi close to stock, which is my preference as an old dude who drives like a grandpa.Unsure if they will actually work with a Dodge truck, but they for sure work on a Honda Civic!I would buy again, if I was silly enough to buy a car that had been lowered again.Highly recommend!

Perfect fitment. Gave me some of n rake back after a 2.5 inch front level. 2016 Ram 1500 Express has 8.25 wheel to fender clearance ad 10.75 wheel to fender clearance. So far ride is good and no problems. Looking forward to finishing the project with 35 inch tires.

Super easy install you don’t have to remove rear tires. I removed my factory air ride and went with an air delete.com kit. The springs they sent me lowered my rear too much. Also hitting bumps at high speed you feel pickup bouncing off jounce bumpers as there was very little clearance. This solved the issue. Rides better , brought the front rake back. Would highly recommend if you were having same issue. Haven’t towed with it installed yet will update if anything negative changes.

Fit was perfect. I installed Bilstein 5100 at 2.8" lift. These raised the back end for a perfect rake. Easy DIY install.

Lo compre para mi camioneta y funciono super bien la calidad es excelente

This seems of decent quality, I don't have any complaints in the field. Installed like several I've installed in the past from other manufacturers. The rear didn't work out at all. My tahoe has independent suspension so blocks for leaf springs were a no go! If I would have even looked at the underside before ordering I would have known this wasn't going to work! My fault. Had to order correct parts from someone else. The front turned out great.

I threw them in on my lunch break on the street in front of my drive way. They moved the rear up 1.5inch as advertised. These are milled steel and seem well made. The coating should keep the rust at bay for a while. For the price and ease of install I'd recommend them.

You must have the dot facing out that’s how it has to be and you have to move the bottom to make it work but they do fit when you get it on