Coavas Window Privacy Film Frosted Glass Window Film Sun Blocking Window Tinting Film for Home Non Adhesive Static Cling Bathroom Door Covering Heat Blocker Decorative Sticker(35.4 x 118.1 Inch, Grey)

I wasn't sure how this product would stick but if you follow the instructions by cleaning the windows thoroughly and using a ton of water (spray bottle) they go on easy and the bubbles are easily removed with a simple/cheap window squeegee. (or even an old credit card) This would be a 5 star review but I took their measurements as fact and divided the 157.5" by 5. Unfortunately I did NOT get 157.5" on the roll so one of my pieces is shorter than the other. It was about an inch short. I don't think you can notice and I should have measured to see that you do in fact get what they say they say is on the roll.

I have a 21in wide x 48in long stained glass window in my front door. After being caught in my birthday suit by a neighbor I looked for a solution without having to replace entire door. I read all the reviews and used the tips from previous buyers. Thank you! It took me 30 mins to install alone (see before, tape and after pics). I kept the shipping tape on the film and used it to separate opaque privacy film from clear plastic after I used a dull razor blade to separate the two near the brown tab in the corner. I only pulled it away about 8-10 inches. Using tape on the pebbled was a life saver when applying to window and installing. It kept the privacy film in place while installing top to bottom. I did no use a squeegee. I washed the window, sprayed with water and wiped liberally with a sponge before taping film. I pulled the clear plastic away as aligned and installed film. Upon completion, I wiped with a clean microfiber towel from middle out to edges of hutch, removed the large bubbles. I repeated the process with a credit card. I’m extremely pleased with the results!

Live how easy it was to use with the exception of....cutting it! It would've been better if there were lines to follow for a straighter cut. I'm very meticulous, and do alot of quilting, so I know how to mark it and cut a straight line. But it's hard to do on black material. Other than that, love it. And yes lots of liquid on the glass 1st! I used windex which also worked great!

This was a great solution to add some coverage to the glass doors on my entertainment center. I followed the recommendations left in other reviews to use soapy water and use a box knife to cut the excess off after install. I would also add the recommendation to clean your glass with high quality glass cleaner before installing. Glass cleaner is made to repel dust and makes a huge difference in preventing dust and pet hair from ending up between the glass and the frosted sheet. It was very easy to install. By easy, I mean one person with a limited skill set can install this in a few hours using household tools. With that being said, you have to take your time and have some attention to detail so you don’t make a mistake. I rushed the trimming process on the first panel I installed and ended up with some rough cuts but that’s 100% my fault. I will be purchasing more to redo this panel. For a $12 DYI project, I could not be happier with the result! I even had enough left over material to add some privacy to the bathroom window.

This product arrived on time and in good condition. I bought to put on the front door and framing windows - the set up allows anyone approaching the door look straight through the house to the backyard, where there is another all glass door (the builder obviously didn't have privacy/safety concerns).As other reviewers have noted, the hardest part is measuring correctly and then trimming the excess off. Measure twice, cut once is the old carpenter saying - and you should follow it. Even though I did measure more than once, I still had gaps on the side for my first application. For the second window, I opted to follow another reviews advice and go about 1/8 inch bigger. That gave me greater coverage, but I had a hard time cutting off the excess because all that is holding the covering to the window is water/suction and when I glided the box cutter down the edge, with the support of a hard card, the plastic gathered a bit. It did not cut easily.I bought the White Frost and it is nearly solid - you cannot see figures on the other side, though light does still come in through the covering.My suggestion to the manufacturer would be to add grid/measuring lines to the plastic backing, like what a quilting pad has or some wrapping paper, to guide the user's cuts. That would have made the project much easier.The adhesion seems to be good. Use more water than you think you need - it really does make the project easier.It's just the measuring that was tough - especially when cutting bit sheets. It's hard to keep a line straight if you're using a measuring tape or quilters' measuring board, even. Including lines would be a big help.I would recommend this product however - it's quick, easy, affordable, and meets the mission - privacy.

I have a window in my bathroom right over the toilet that I didn’t want to cover with curtains so that we could maximize the natural light in the small space. This window cling has been really easy to install, with the hardest part being getting the cuts straight. So happy to have more privacy in this bathroom!I used a plant mister bottle with water to mist all over the window after cleaning it with glass cleaner. Peeling the film back was pretty easy, but I had cut two sides (the height was larger than I needed) so I checked the corner where both cuts intersected and got a little edge to peel back from. The film clung instantly, and I used a squeegee from a phone glass protector kit to squeegee the entire surface, but I’m sure a credit card would do the trick too. Will have to update on how well it clings throughout the seasons, but it wouldn’t be a hassle since spraying, sticking, and squeegeeing take like 5 secs.For anyone having trouble with removing the film backing, if you’re able to make a small cut that intersects with your width cut (from cutting the film from the roll) to make a corner, that might help you!

Chose this because of the great reviews. But it was a horrible experience. Firstly, I just couldn't separate the film from the sheet at the edge. Gave up after 10 minutes and called the Mrs. with longer nails. It was quite a struggle for her too. When we finally managed to, the protective sheet just couldn't peel off properly, tearing in multiple places after which it was impossible to remove the sheet. Tried 3 times. Had the same problem. In the end, my patience just gave away and I ended up dumping it in the bin. I'm surprised to see so many customers had it so easy. It was a real struggle for me and the Mrs. who tried too after I gave up. She called it quits after the second try. Defective/Fake product?

One of the windows in my apartment didn’t offer me as much privacy as I like. This product was the perfect solution. It was easy to apply and is able to be removed without causing any damage to the window

Unfortunately it just wouldn't stay on. Used plenty of water but after a day or two they would peel off or completely fall off on their own. Asked my dad to apply them for me assuming it was a me problem but the same thing happened.

Excelente, muy fácil de colocar, lleva un mes puesto y no se ha despegado, al principio quedó uno de los lados mal puesto pero con agua se corrigió

Product was easy to install and works great for what we needed it for. Even in direct sunlight it hasn’t started to peel off yet! Would recommend if you need some privacy