10” Inch J Pole Mount Accessory for Outside Antenna(Signal Booster Antenna, Yagi Antenna, Antenna Expansion kit, Dish, TV Antenna, Camera Pole, Weather Proof)

The band clamps make for a super easy, non-destructive install. I didn't need to drill holes for hardware or anything, just mounted the band clamps around some pre-existing pipe on the side of the building. It holds very firmly when tightened, zero wiggling or unwanted movement with the mount. It's been standing up to some pretty high winds too.

This is what you need if you are mounting an accessory antenna on a mast pole. This J-pole clamps to the mast with two stainless steel hose clamps; the plate in contact with the mast has a little saddle with steps to hold it securely in place. The J is adjustable to keep your antenna in the correct orientation (vertical or at an angle), with index bumps in the adjustment plate. I clamped a 1080 mHz ADS-B antenna to this mount to have it stand off from an aluminum mast that holds our weather station sensor package. Works like a charm and naturally the antenna now works properly. The construction is sturdy welded steel, with a heavy enameled coating protecting the metal. Considering many similar products sell at three times the price without offering any added value, I can heartily recommend this one.

I needed two people to install. Overall, the installation was fast, no major issues.I had to have my son hold it in place so I could tighten the clamps to hold it in place.It appears to be a solid pipe, it should hold up for many years.I would buy it again.

Installation is straight forward, mount to an existing pole or to a wall. Sturdy and lightweight. Great value for the money.

This j-pole arrived fast with all the hardware needed to attach to my antenna mast. The wi-fi module attached to the pole with room to spare and the mounting seems secure. We haven't had any insane weather since the installation, so time will tell. I have faith.

I am using this to mount an outdoor weather station parallel to an existing vertical pole. This mount has mounting positions at 18 degree intervals but cannot be set at 0 or 90 degrees, because the dimpled location positions are not correctly punched in angle with respect to the mount to accomodate this. An easy tolerancing issue to fix, but obviously no one at the manufacturing end or the QA end cares.In typical cheap manufacturing manner, the four labels on it did not simply peal off, but had to be scraped off carefully and left a sticky residue. The residue did not remove with alcohol and attemting to do the same with acetone also remove the white paint.It would probably have cost nearly $0.01 to fix tall his in volume manufacturing, but does anyone in China care about the Bolton brand name?

This mast worked outstandingly well!!!

Cheap hardware... screws and metal work.

needed something that i could easily attach to my homes TV tower to install the pole mount for starlink easily, this was an extremely simple solution to that problem and works great

Antenne Wifi 6 extérieur TP-Link + caméra POE PTZ

There are quite a few of these mounting brackets available on Amazon at various prices but I suspect they are all the same.This is not heavy enough to support a dish in my opinion… strictly for antennas like my cell phone booster shown. First, throw the screws that come with it in the garbage where they belong. Why the Chinese can’t make decent screws is beyond me. One slip and the head is ruined. The pipe itself is barely sturdy enough for antennae. I repeat, no dishes.But with decent screws and everything tightened as tight as you dare it should do the job hopefully for years.

Je retourne ce produit que j’avais commandé pour fixer la station météo, mais la station ne me convient pas.

This was easy enough to install and the quality is decent for the price. However one thing I noticed is the angle adjustment is not great. Even if you use the nut to try and orient it correctly, it has these adjustment spots that it will always go to no matter what you do, so it's hard to get a perfect alignment. For this I would suggest if you need to finely control the angle of the bar, you might want to look at something else. However for my application this worked fine.