Fountain Pump Nozzle kit, 8PCS Water Fountain Spray Head Set-Mushroom Water Fountain Spray Heads for Pond Fountain Submersible Pump Pool-L Black

I liked it. I used it for a fountain I made

You get what you pay for .the product is as described but a little on the delicate side. The parts will crack easily if not careful as far as holding up I would not recommend this product for long term use cheap very cheap plastic.

The media could not be loaded.  Update: June 2nd, 2022I'll have to agree with other reviewers who have commented about the durability of the plastic used in this kit. During testing, the combination of the unit's height/weight and water pressure caused the extension with the mushroom nozzle to tip my pump over and a piece broke out of the nozzle. I managed a repair by filling in the missing piece with a product that bonds to plastic when cured with UV light, and then shaped and reinforced the whole top with fiberglass and resin. It's now MUCH stronger and works just fine, as is shown in the accompanying video.***************************************************************************************************************Original review:Well, this is kind-of a hot mess. As other users have pointed out:1) The 'instructions' are virtually useless, being printed on the back of the packaging.2) Some parts shown are either not included or differ from what is shown in the picture.3) Some of the pieces don't seem to fit together -- you have to cobble something together.Special bonus! There are 5 spray patterns depicted. 4 of them appear to be identical. How handy! (Pardon my sarcasm…)I did manage to get the mushroom pattern to work, which is what I wanted the most. I have am 800GPH pump, which is quite powerful and the size adjusts over a large range.If you don't mind tinkering, figuring things out and maybe making a couple of trips to the hardware store to buy something that will connect this to your pump, it may be a good buy. If you're easily-frustrated or uncreative -- make a different choice.

Made an adapter to convert from the old size to this new size.Suits up so no over spray out of small pink.Elevated pump to pull in less stuff.Used large size paper clip the clear ports then squirted water backwards though unit to clear out stuff.

This package contained one single adapter that fit the extenders on one hand and the fitting on my standard-issue little pump on the other hand, and that adapter - about an inch long -cracked and became useless in less than two weeks. So the whole package was of no use. Very disappointing.

I wanted a "bubbler" type water feature that plops the water just above the pond surface. So I just needed the rigid vertical tubing and not the fountain spray heads (although I now have options). My pond is about 18" deep and 4' across. I selected this kit because it has multiple small segments that allows me to adjust the tubing height just right.Getting the desired esthetic takes some experimenting balancing the force of your pump with the fountain heads/tubing. I appreciated the restricter valve included on this model that allowed me to adjust the pump flow until I got the look/sound I wanted.Making all of these height and flow adjustments is where the failure happened. Surprisingly I got a perfect display first time but then the pump kept tipping over (and therefore the fountain tipped over). I fixed that but noticed a reduction in fountain height/performance, hmmm. Next I had water quality issues so I added a pre-filter which solved that problem but again a further reduction in fountain height/performance was noticed. Additionally, the fountain was now slightly bent and that altered the water display.Frustrated, wet, and determined I took the entire apparatus apart and found the problem. Several of the individual segments of the fountain's rigid tubing had hairline splits vertically (from the multiple adjustments), the segments were no longer tightly fitted and that caused loss of pump pressure. I dried all the tubing segments, filled the splits with E6000 glue making them water tight again, glued each section/diverter together, and then glued the entire thing to the pump. It was my last ditch effort to get this flimsy piece of plastic to work. Two weeks into my new fountain install and I finally had success.If you purchase this set of fountain heads I recommend gluing the pieces together to assure an airtight fit, better performance, and a straight fountain display.

Este producto fue utilizado para una fuente de agua para aves

Dissing cheap chicom ( or maybe chicap/com these days? If you’re old enuf to remember “Terry and The Pirates” in the fishwrap medium, you know the difference) fake crap on Amazon is a popular passtime but here’s a <10$ set of fountain spray heads that work very well with a small AC pump plumbed with 1/2’ Tygon tubing. The mushroom is particularly nice and very easy to adjust to a three lobe tulip. Another head produces an intermittent spiral with varying center column hgt. One head has substitutable heads secured by a threaded central core. There are no instructions and only rudimentary illustration of disassembly so this particular head is useless to those with limited patience for a mechanical puzzle. All the extension tubes are a decent friction fit to the heads and the tubing I use and recommend. The objection to the inline valve extender that it is nearly impossible to adjust is correct. None of this kit is going to survive in a plumbed pond like brass and stainless but for a recirc hummingbird bath shaded from UV, most bits will survive a couple of years.

It works just fine but is too fragile. The link cracked where it connects to the pump after 10 days.

Product is good but expensive

Unable to joint the items received as parts are unable to couple hence please refund