QWORK 12mm 1/2” 304 Stainless Steel Rope Tube Thimble with Gusset for 3/8" or 1/2" Wire or Winch Rope, Black (Pack of 2)

I used one of these at the top of a swing that’s suspended from a branch about 30’ above the ground. I used 1/2” rope which was a snug fit getting through the holes but it did work. I connected a carabiner to that and the swing to the carabiner. It all worked great and should last a very long time!

The media could not be loaded.  Very impressed with this thimbles. I unsplice my winch rope and swap out the old thimble for this one. With the gusset plates it spaces out the tubes that the rope goes through giving the rope less of an angle coming into your first splice.

What I did to be able to put it on. JBweld epoxy the end with the lug (brush on). After drying used a hack saw to cut. Used epoxy to cover the cut. When dry I bench grinder to shape smaller and bullet shape. I applied veggie grease at entry point and pushed it through. Pliers helped bring 18 inch through and put it back on return hole. Put in a figure 8 climber's knot in the rope and wrapped it with pond liner and clamped. Used dawn to wash off grease.

I had a new winch rope on hand as I picked it up at a good price. I didn’t really need it and so I decided to convert it to an extension rope. The rope I had was a 3/8 Dyneema. The thimbles worked out well to create the extension.

Awesome!I suspect that these little beauties will become standard equipment on all anchor lines they make a splice super simple to create by yourself.

Haven’t gotten a chance to try these out yet, but they appear to be very well made. Should hold up to anything I put them through!

I didn’t know that this kind of hooks exist. Perfect for my project.Downside took them 9 days to arrive, good thing I’m paying for Amazon Prime.

I can’t fit the 1/2 inch rope in it

Je vous conseille de choisir un peu plus grand que le diamètre de votre corde