856 ₴

Description

CNC Shield Board: Latest for Arduino CNC Shield Version 3.0 GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Runs on 12-36V DC.
Arduino Board: MCU: 328 USB interface: ATmega16U2 Operating voltage: 5V Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 I-I/O pin output current: 40mA max 3.3V output current: 150mA max Flash memory: 32 kB (0.5kB used by bootloader - included) Static RAM (SRAM): 2 kB EEPROM: 1 kB Clock speed: 16MHz.
A4988 Stepper Motor Driver: A4988 Stepper Motor Driver Board is a breakout board for A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.).
PPackage Contents: 1 x CNC Shield Board 1 x Board for Arduino 4 x A4988 Stepper Motor Driver 4 x Heat Sink.
›See more product details.

Colour Name:Red CNC Shield Board: 1>PWM Spindle and direction pins 2>2 x End stops for each axis (6 in total) 3>Coolant enable 4>Uses removable A4988 or DRV8825 compatible stepper drivers 5>Compact design 6>Stepper Motors can be connected with 4 pin molex connectors or soldered in place 7>Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) 8>Please note that this is an unassembled kit and Basic soldering skills are needed DRV8825 Stepper Motor Driver: 1)*Suitable for driving below 8.2V ~ 45V 2.5A stepper motor 2)*Six different stepping resolutions: full, half, 1 / 4,1 / 8,1 / 16,1 / 32. 3)*A simple steps and direction control interface. 4)*Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate. 5)*Automatic current decay mode detection / selection. 6)*Thermal shutdown circuit, undervoltage lockout, crossover current protection. 7)*Ground short-circuit protection and load short-circuit protection. 8)*DRV8825:20*15*11mm/approx 0.79*0.59*0.43inch(L-W-H) . 9)*Heat Sink: 9*9*5mm/approx 0.35*0.35*0.2inch(L-W-H). 10)*Net weight: 4g A4988 Stepper Motor Driver: 1>Low RDS (On) Output 2>Automatic current decay mode detection / selection 3>Mix with slow current decay modes 4>Synchronous rectification for low power dissipation 5>Internal UVLO 6>Crossover-current protection 7>3.3 and 5 V compatible logic supply 8>Thermal shutdown circuitry 9>Ground fault protection 10>Load short-circuit protection 11>Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 12>Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble) Package Included: 1 x

Reviews

HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red)

Fast Delivery to Ukraine

Easy Returns & Exchanges

Ask About This Product

Similar Products

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Ukraine. For more details, please visit our Support Page.

Frequently Asked Questions About HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) in Ukraine

Where can I buy HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) online at the best price in the Ukraine?

desertcart is the best online shopping platform where you can buy HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) available and ready for delivery in Ukraine?

desertcart ships the HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) to Kyiv, Kharkiv, Odesa, Dnipro, Donetskand more cities in Ukraine. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) online?

desertcart buys HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) on desertcart?

Yes, it is absolutely safe to buy HiSKY CNC Shield Contoller Kits for 3D Printer, CNC Shield Expansion Board V3.0 A4988 Stepper Motor Driver with Heatsink (Red) from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.