Steck Manufacturing 21845 E-Z Store Door Alignment Bar

Works extremely well. Be careful using this as it can really distort the door frame and or pop the skin welds. Also, please make sure you're not lifting the door into the fender while doing so. Please also know, this method doesn't really bend the hinges so much as it's really bending the door frame itself that abutting the hinges. I've used the 3.5' wonder bar in my body shop days but believe me, this works just as well to aid in door alignment. Actually, it's even a nicer application as the tool is contorted better in it's design and obviously storage is more convenient. Please know, I've been around the block a few times regarding, and this tool or at least this type of tool is really worth having even for just one use. Just tweak the door ever so slightly when you start using it as not to over bend the door. You'll soon learn how much leverage is needed and it's usually not all that much. Please know, the door can hang for several reasons but, if the hing pins and or bushings are worn, I'd replace them first then adjust the door. That's just me, though I'm certain some will use this as not to change the bushings and pins which is of course, another process requiring another tool set. So leave the floor jack, blocks of wood, and dolly's where they are and get this tool. Good luck!

Did what is said it would do.

used to adjust with a 2 x4 and brute strength, this makes it easy

It works good for popping hinge pins in or out but not as effective as I would have liked for door striker adjustments could stand to be a bit slimmer for that.

ended up buying this as the junk the car manufactures produce is so light and flimsy now days the doors will only work for a short time with out needed adjustments to close or what ever,yes I have "adjusted" (bent) the hings with out a tool in the past but the control was not always there, this lets you control the "adjustment" your making. and the angle the door is open is much better for the hings when adjusting, so you do not over do or move thing out of alignment,I like the fact it will fit in the tool box, with the other door hing tools,

Worked great but remember to watch the door to fender gap while bending so you don't chip your paint. Just move it a little at a time.

Tool works but I found it a little awkward. With the proper latch pin in position in the latch the bar pivots away from the correct position when upward pressure is applied and tool can slip out of door latch unless it is held in position with a free hand. I have had a door adjusted by a local auto body shop before and there tool was far superior in ease of use and results. I am considering spending a little more money for a better tool.

New Tesla passenger door didn’t close nicely and after inspection noticed the door was low. This took about 5 minutes to adjust, working slowly. Has been great ever since.

Herramienta de calidad

Arrived well before the promised date. Product is exactly as described. Have used it several times on my Jeep Grand Cherokee. Tool works great and has saved me a lot of money by not having to get a collision shop to keep making the adjustment. Well worth the investment and easy to use.

One of the most handy tools if you own a late model vehicle with welded hinges. Works fantastic.

Great tool

work graet. Does what it was meant to do. Makes it easy to do this by your self.