Phanteks PH-EC300PTG_BR Eclipse P300 Tempered Glass Steel ATX Mid Tower Case Black/Red

I bought this case because I had limited space for a pc case. The size is amazing. Build quality is great. There is an updated version of which I would have liked to get (G300A) but unfortunately wasn't yet available locally.

The best budget case I have ever tried, so easy to build, so easy to manage cables, and the design is so cool, but I have a proplem, it is that there is no RGB inside, or RGB Fans

Worth at the reasonable cost as offered by Amazon.

very good casei suggest you to put more intake and outward fans for better airflow

The cost to quality fallacy gets musicians and tech nerds the most. I love how one reviewer says, "this is a good entry level case for moderate gaming". Huh? Moderate gaming? Temperature is the metric that means the most to me... you know, performance?I do intense gaming with a Ryzen 5900X and RX 6750 XT. AAA games at max settings w Ray Tracing for hours on end at 1280. I can also render to my heart's content, including Blender and StudioOne projects. I've got 4 Blender projects rendering right now on the computer I am typing this review on, and HWINFO has both the CPU and GPU at 60C.For fans I have 3 Corsair 120ML Pro and 1 Corsair 140ML pro. The CPU is cooled with a Skythe Fuma 2. Bottom line, temps are never a problem.As for other features, I like that it is relatively small for an ATX case. The side panel is made of heavy high quality glass that sits in solidly. Cable management it fine. The controls and USB interfaces are fine. Drive space is fine and easy to access from the back or by removing the front panel. The front panel is easy to remove but still sturdy when in place. PSU storage is fine with an easy to remove and clean dust filter on the bottom.No frills is the path to bang for the buck. The thing that many more expensive cases get wrong is simply restricting air flow. That's all. No magic. This case's mesh front does great at letting the air in.If I had to search for one nit-picky gripe, there is a weird little white LED light strip thing at the bottom that doesn't line up well and is distracting to the aesthetic, but I just unplugged it and you can't notice it was ever there. But it was a strange design choice.

Esta de mas decir que este case no busca estetica, si quieres algo MUY bonito ve a por la serie 300D de corsair que esta al mismo precio en 2021. Sin embargo, su calidad de construccion esta muy bien, se siente mas caro de lo que es. El unico detalle en cuanto al diseño del case seria que el espacio de la fuente de alimentacion es muy reducido para una ATX, por lo que batallaras un poco al introducirla en el case.El PRINCIPAL objetivo de este case es mantener FRIOS los componentes de tu PC, acompañado por dos o inclusive un solo ventilador, puede alcanzar el rendimiento de los modelos Airflow mas caros del mercado.Si tu plan es tener un dicipador de stock y encima escojiste una placa con una calidad de VRM custionable o que alcanza muy altas temperaturas este es tu case.Si te interesa meter una AIO Liquida en el recomiendo checar la compatibilidad antes de comprar, ya que las tolerancias son muy justas.

This is an excellent case for minimal builds where you don't need a lot drives. There are enough fan slots at just the right locations. I specifically was looking for a case with great air flow, yet not too many holes around the fans (outside the fan frame) to prevent cycling air from around the fan rather than through the case. With 1x 120mm on the rear, 1x 140mm top, and 2 140mm intake on the front, this case has some nice cooling.I did modify the front fan mount brackets so there was less blockage of the 140mm airflow. I never plan on using 120mm there so there was no reason to not make that modification. This was the first case I've ever used where I didn't need to engineer more than just that in 22 years time of custom building computers. Even my Lian Li Lancool II Mesh required far more modding (mainly the top), but that's another story.Pros:It looks stylish with a tempered glass window.There is excellent airflow with proper fans placement.It can accommodate a full ATX motherboard without issue. E-ATX might have a bit of a problem with the cable bracket, but who uses that size motherboard now?There is decent cable management in place.The case has a power supply shroud.The top of the case is removable, which does help for installation. That came as a surprise!All of the pros above at such a low price (currently $60 CAD)!Now the cons:The case didn't come with the SSD mounting bracket (supposed to have 1), BUT that was remedied free of charge and relatively quickly by Phanteks support...so I'd say that turned into a pro!The case is made of weak metal, and the paint chips a bit too easily. The weak metal actually turned into a pro for the part I had to modify, and it's not flimsy enough to really worry about. For the price point it's to be expected. In fact, the material is better than what I expected for the price.The included fan is junk...as usual and once again expected. I almost always replace the sleeve bearing fans for some of higher quality anyway.This case might be too small for some wanting to install HDDs, especially with a long power supply. It would be a tight fit to attach cables to the HDDs. If that's your plan, then just spend a bit more and get the P400A. It's pretty much the same as the P300A only bigger, so more room to work with things like HDDs.The cable management bracket made for a tight squeeze for the main power cable. It'd be nice if Phanteks adjusted the gap to be about 1/4" larger on the upper half.The power supply can't be mounted facing up without further modification. Not a bit deal to me, but some might find that annoying.Summary:The P300A is probably one of the best cases you can buy if you don't plan on installing HDDs. I know my "cons" list doesn't do the case justice. Most of that list really is nitpicking since there are many other cases out there that aren't nearly as well designed and cost a lot more. When ordering this case, do plan on adding fans to the list. While that increases the cost, you should already plan on that anyway.This was the first case I've bought made by Phanteks. I wouldn't hesitate to buy from them again. Their customer support was flawless in execution to remedy the missing part. Some might argue the part shouldn't have been missing to begin with, but these things happen sometimes.With the ability to buy computer parts that go together in a more compact manner, I can't help but award this case a 5 star rating. I hope they take reviews like this one and make improvements for the next version. They're getting closer to perfection.

I always wanted to build a computer that would have enought space for all the necessary hardware needed to create videos for family use, like birthdays, weddings and so on, this Mid Tower Case by Phanteks gave me pleanty of room and more, if you look at the photos I posted you will see no wires in the inside of the case and pleanty of room for undisturbed air circulation wish helps the fans maintain the hardware much cooler at a lower speed and therefore run much quieter, also not to meantion a clever magnetic filter screem located on the top of the outside of the case to accommodate the top fan, making it easy to keep clean from the outside.On the top front of the case, it has a control button for led lights that are intergrade into the case to control the power button and the left side panel bottom led lights, this controls the different colors that come with the power button and the side led only, on a black case it gives you that "Night Rider" effect, but what is missing is the movement of the light, sorry got carry away with the show Night Rider.So as I was saying on the top of the case you also have easy access for headset plug and microphone not to mention two USB outlets, wish makes it very convenience.The power supplied and hardrives has its own compartment at the bottom of the case and is one of the reason you dont see any wire plus it helps keep some of the heat of the power supply away from the mother board.The inside of the case is well painted in my case a nice candy red. The front panel is easy to remove, from the bottom just lift out and their you will find on the panel top and bottom a filters for easy cleaning, and on the case front two easy to use hardrive brackets, ah I almost forgot on the right side panel inside the case their a bracket for a SSD drive installation.On the left side it comes with a real tempered glass panel, good for admiring your fans and rams led light plus keeping an eye on your CPU/GPU fans (to make sure they are running).The rear of the case offer plenty of expansion slots to accommodate different ATX motherboard and Graphic card.I love my computer case and I would recommend it to all, the price is resonable for what your getting. The only downside is that they are build in China and are ship to Brooklyng N.Y. it takes about a month to deliver to most states in the US wish made me go crazy with anxiety, but I used the time to do some research on all the hardware and software I was going to need and also, it was hard to find a good graphic card on the shelf of all major stores so that took some waiting time off my back, and all because of, yes you guess it covid 19.

Prisvärd låda, har byggt 3st datorer med detta case. Kanske inte premium, men många smarta detaljer och en design som inte känns "billig". Passar både gamern och i hemma kontoret.