Protect your valuable VW or other Classic with this simple, automatic extinguisher! Simply use the zip ties to install the extinguisher tube above the potential fire source and forget about it! This is an ideal solution for our air cooled vehicles. With no wiring and zip tie install you can protect your investment without drilling holes or modifying the electrical system, no wires needed! BLAZECUT operates automatically without any power supply by detecting higher temperatures: When the temperature in the protected enclosure rises to a critical threshold, (sustained temp of 120*C or 248*F) the detection tube melts down at the point where the affecting temperature is the highest. Blazecut is A.B,C rated. It is recommended to check the functionality of the system by a simple pressure check: The system is under pressure and functional when the pressure indicator is above the value of 0 bar. The pressure indicator will change depending on the ambient temperature, the pressure at 20 Celsius is approximately 2 bar, and the pressure at 90 Celsius is approximately 10 bar. The system cannot slowly leak down or loose pressure like a conventional fire extinguisher. If the gauge is at zero, or you cannot see an air bubble in the line, the system is empty and should be replaced. The FE-36 clean extinguishing agent does not leave a residue, conduct electricity, corrode or cause shock damage. This makes the clean agent solution the right choice for sensitive devices.
Trustpilot
1 month ago
2 days ago
