3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

I put this item on my cr10 s5. Tight fit and works nicely

I purchased the "Direct Kit - 4 Pulley" kit. I bought the 4 pulley kit after reading several bad reviews that complained about slop or wobble and not being secure on the 20x20 extrusion. Figured it would be more secure than the 3 pulley model. When I installed the kit it obviously has eccentric spacers on the bottom pulleys so anyone can adjust as much "slop" as they want out of the installation - to the point of being so tight as to not move at all. Just adjust to where it moves easily but doesn't "wobble", easy peasy. As far as ease of feeding filament, it's not hard. The only problem for me is the extruder faces my wall so it is not easy to see when changing filament, but takes no more than a few seconds to get it to feed. My MK8 hot end fit perfectly, the electrical adapter cable was a direct fit, my old stepper motor worked with no problems and the kit I received did come with a BLTouch mount. The kit comes with a new drive belt that will need to be cut to size, but everything is included, including the crimp on ends. I don't see any difference in the quality of the CR-10 mounting plate and this one. All in all, I'm very happy. I purchased to print TPU, but I've only had it a couple of days and have only printer PLA so far. My prints look as good as ever. I might have a different opinion after printing TPU, but with the original setup I couldn't print it, so this can only be an improvement. Well worth the money imho.

No directions were included

Seems decent but I have 2 issues. 1 is an issue i caused or created that does not reflect on the product, the other is definitely not my fault.1st issue: I did not qualify my purchase by confirming the application. I have any Ender 3v2. This product is not meant for the ender 3v2. This product is not designed to incorporate BLtouch, regardless of application. If you printed an adapter for the BLtouch for ender 3v2, it does not swap over (and why should it though). Once again, my mistake but be aware.Does it work on the 3v2? Sure. Am I happy? See issue #22nd issue: Once installed, surely and securely, this adapter plate has some slop in the wheels. I don't know of a more eloquent way to put it other than the tolerances aren't quite correct for the wheel spacing so there is a little bit of wobble in movement of the entire printhead. There are ways to rectify that but the route that I went is not a recommended way. Unfortunately I just did not have time to implement a sound fix. Perhaps someone else with more skill and better words can describe in detail a quick fix or possibly give an explanation of what I've done wrong. In the meantime oh, I'm not returning the product but not because I don't want to, however I can't afford to have the machine down.I'm waiting on another bracket to try out hopefully it'll solve the problem and integrate bltouch for my application

The motor position makes it hard to upgrade the blower fans. A bullseye mount will work with some modification, but petsfang won't.

Not sure how that bend will work with flexible filament but first print after I stall was great. I used my old motor and extruder. Didn't adjust e steps not sure I need too but I might later.

Bought this to replace the bowden extruder on my cr10. I have had zero issues with clogging and it prints tpu like a champ. Very satisfied.

Please be aware that the product is sound and I would buy again. The only reason I would buy again is because now I know how to assemble it. This seller assumes that you are versed in how these machines are assembled and operate. If you are a newbie like me you may want to continue looking for a seller that will help you out with just a TAD of their KNOWLEDGE!

Dieses Montageset - Platte für DirectDrive Modifikation - wollte ich am Ender 3 V2 installieren. Doch irgendwie sah es bereits etwas "getestet" aus.Am Ender 3 V2 würde es sicher passen, doch so muss der Vorgänger bereits festgestellt haben, dass der 0815 Lüfter mit HotEnd dort so nicht passen. Ausgepackt, angeguckt, getestet und für unpassend empfunden.An einem entsprechenden 3D Drucker mit 100% Passgenauigkeit, wäre dies definitiv aber eine Aufwertung vom Bowden zum DirectDrive.

es passt alles Perfekt den Umbau hätte ich schon länger machen sollen! Ich habe mir nur die Trägerplatte gekauft und die vorhandenen teile verwendet. der Druck mit PLA+ ist jetzt noch genauer.

Fantastico, ospita tranquillamente il mio supporto per ventole preesistente che avevo stampato precedentemente.Fa il suo lavoro ed è completo di staffa bltouchMolto gradito il tubo di riserva

A causa del peso della piastra l'otturatore una volta in alto scende da solo.

Super Idee funktioniert perfekt und kein Problem mehr beim filament Wechsel