4 Pack Replacement DYMO Industrial 18053 Heat Shrink Tube Labels, 3/8 inch Heat Shrink Tubing for Cables, Fit with DYMO Rhino 1000 4200 5200 6000 Label Makers and More, Black on White, 9mm x 1.5m

Superb amazing product as described will buy again

Excellent product!

Couldn’t justify the cost of the dymo brand, purchased this instead and works phenomenal

I ordered these to run a test on both DYMO and Aftermarket brands.(Note to all.)I have read some comments about the distortion while printing using these aftermarket labels.I have also experienced that problem as well using DYMO brand.The solution in keeping that from happening is.Keep your labeler fully charged at all times!! 🤬These labelers use heat to transfer letters and numbers onto the labels!Now that we have that clear!I have looked and compared both of these cartridges to be the same quality only the aftermarket seems to be just a little thinner in material but not by much.Tubing wall material thickness is 0.001" or 0.02mm comparing both brands.While printing I have noticed that the aftermarket seem to be just a little darker in print.While stretching I compared both of them with the letters and notice no cracking or peeling.While shrinking them down on using exterior burial cable notice that neither one showed any deformities are breaking.( Heat gun was set at 700°F on both samples for one minute each.)Bending and twisting.Both samples showed no breaking or distorting of material.Rubbing test.I used a new microfiber towel and rubbed both samples for 10 seconds each.I noticed that the DYMO would not only smear but also started to fade.The aftermarket did the same smearing yet did not seem to be fading while rubbing sample.So on that note:All I can say the difference is in price.1 DYMO for $23?Or4 Aftermarket for $23?Your choice.....I will assure you I use these on a day-to-day basis out on the field in my line of work.I also assure you I don't do product reviews very much.Yet!When I find a product that is used quite often and acceptable ..I will do a product review on it.Only if I feel the product is worthy of my time.Take care out there and be safe!

bought 1" and 3/4", I was searching for a way to label ethernet cables with a shrink tube instead of flags, all the cables I had were already crimped and I didn't want to cut and crimp just for the shrink tube label, 1" works well, it feels like they stretch more than 1:3, the proof is in the puddin watch the photos. (if you have a big headed cable it wont work, as shown with the gray cable).

Price