🔄 Revive Your GPS, Revive Your Adventures!
This 1250mAh lithium-polymer battery replacement is compatible with various Garmin Nuvi GPS models, ensuring reliable navigation. It features a 3.7V output, comes with free installation tools, and includes a 1-year replacement warranty for added peace of mind.
Recommended Uses For Product | GPS |
Item Weight | 0.8 Ounces |
Battery Weight | 22.67 Grams |
Reusability | Rechargeable |
Battery Capacity | 1250 Milliampere Hour (mAh) |
Voltage | 3.7 Volts |
Compatible Phone Models | Garmin Nuvi 200 |
Battery Cell Type | Lithium Polymer |
E**O
perfect
This is just what I needed for my old car Garmin GPS. it holds the charge well and it fits perfectly.
P**N
Revised my Nuvi 200
Yeah, I know, everyone uses their phone. But my Garmin has a lot of destinations programmed in it, so it's easier to replace the battery rather than transfer addresses to a phone.Replacing the old battery is not too difficult if you watch a couple of videos. The tools are cheap, but they're good enough for opening up a few cases before they're shot. At least tools are included.This battery works fine so far. Now if I remember to not cook the GPS in the hot sun, maybe the battery will last a long time. Price is reasonable.
B**E
Works great!!
Replacing the battery on my Garmin GPS went smoothly and the new battery works great. Only time will tell how long it holds a charge, but so far, so good...
R**K
Perfect battery. Install is not easy. Cheap plastic tools.
First off, the battery fit perfectly and the harness was correct for the Garmin 255W. It is a tad bit smaller than the OEM battery and the amp-hour rating appears slightly less. But the 12 year old OEM battery was still marginally alive, so this one should give decent service. I reused the double-sided sticky tape that held the OEM battery to the case. A new 1 inch piece of tape would have been nice to have.The tools provided were cheap Chinese crap. Tiny Phillips screwdriver's tip deformed removing a screw set in plastic. Thankfully, the small Torx bit fit perfectly and did not deform - you will need this tool to open the case. And opening the case was impossible using the plastic pry tools provided, all broke or deformed. So a butter knife saved the day. And magic words. I used a lot of those.Lastly, be aware that there is a ribbon connector that goes from the screen to the PCB. When you open the case there is about a 99.99% chance the ribbon cable will detach. You can't replace it with the PCB screwed into the case. First lock in the ribbon cable, and then gently move things around until things fit. If you are lucky you won't have to try this more than 8 or 10 times. And be aware that the on-off slide switch will also jump out at you. Be sure the notch is aligned with the pin on the switch on the PCB board when you replace it. It only fits one way..If you have patience it helps. Overall I would get this again, but without expecting an easy replacement.
T**R
Saved an old GPS
WATCH A VIDEO ON YOUTUBE before you install the battery. The GPS is now usable again!!!
N**E
Worked
It works, was easy to install, a perfect fit.
L**K
battery works fine but the tools provided did not work on the Garmin Nuvi 260W
battery works fine but the tools provided did not work on the Garmin Nuvi 260W
B**G
Works Great
Thanks to this replacement battery I've extended the life of my Garmin.
Trustpilot
2 months ago
1 month ago