GRANBERGChain Saw Mill, Model# G777

Q: Sounds like the Stihl MS180C is too weak (32cc). Would it work just for a trial run? What 20" (but not too $$$) saw is recommended?

I have a Stihl MS170 that I use with this mill. It out performs my Husqvarna 450 Rancher for milling logs. The down side is the Stihl is only a 16" bar and my Husqvarna is 20". But I usually have to make two passes anyways because the logs I mill are no less than 24" in diameter. I do wish the mill had longer rails to ride on top of the log. My rails are too short for the extention ladder I use as a guide for my first cut.

Q: I a saw chain b2ft-64dl .325" .058"/1.5. would it be good for the mill? are there any better choices for this job? where can i find them? thank you

Your chain saw blade needs to be at least 20 inches long. If it"s longer, that"s OK. Your chain saw motor needs to be at least 55 cc. less than that and your motor will fry. When you use a chainsaw you usually cross cut wood in a matter of 1 or 2 minutes running the saw at top speed. When you use the Granberg Mill you are cutting the wood with the grain and running your saw at top speed for up to 1/2 hour. This is why your saw needs to have a bigger engine.

Q: Will this work with a 24" or is there a better choice?

Yes this will work fine with a saw with a 24" bar on it. It will make cuts through logs up to say 20" diameter.If you have a 24" bar I would consider getting an alaskan Mill mkIII in the 30 or 36" range(can be adjusted down to fit your smaller bar length). This model only clamps to the saw blade at one side. If you are cutting larger logs then your saw will have more of a tendency to dip out at the tip where the blade is not supported by the mill.You can order new rails and an accessory kit from granberg to convert your Alaskan mill to a MkIII. Thats what I did when I outgrew this unit. When i upgraded my mill to a MkIII I also got a bigger saw to push it.. my ported Stihl 290 worked fine with an 20" bar but I switched to a Stihl 660 to push a 36"bar longways through that much wood.

Q: I bought this as a gift. Can someone recommend a good chainsaw that will work well with this.

Works well with a Stihl MS251. Most people say you need around 60CC to be happy milling, but if you keep it to softer woods, smaller logs, or go slow, you should be fine with 45-50CC

4.6/5

Product ID: 296194202

Secure Transaction

Details

Brand
GRANBERG
Power source
Hand Powered
Horsepower
1 Kilowatts
Item weight
50 g
Product dimensions
50.8L x 33W x

💪Lightweight at 49.9g

🪵Cuts beams 1/2in to 13in

⚙️Fits 20in saw bars

Frequently Bought Together

Granberg Chainsaw Alaskan Small Log Mill, G777- Portable Sawmill Timber Attachment Machine Tool - Wood Case Cutting Holder Equipment Guide Kit - Bars with 16-20 Inch - Lumber Milling Wedge Tools

Granberg Slabbing Brackets by Granberg International

5.5 Inch Felling Wedge Chain Saw Logging Supplies Set of 4

Description

🌟 Unleash Your Inner Lumberjack!

🔋 HAND POWERED - No batteries needed, just pure craftsmanship!
🔧 EFFORTLESS SETUP - Attaches to saw without drilling!
🌲 VERSATILE CUTTING - Access nearly all timber types with ease.
📏 PRECISION ENGINEERING - Cuts lumber up to 17in wide for your projects.
🏋️‍♂️ LIGHTWEIGHT DESIGN - Easily transportable at just 49.9g.

The GRANBERG Chain Saw Mill Model# G777 is a lightweight, hand-powered mill designed for precision cutting of beams and lumber. It accommodates timber thicknesses from 1/2 inch to 13 inches and widths up to 17 inches, making it an essential tool for any woodworking enthusiast. With a simple attachment to your chain saw (20 inches or less), this mill offers a hassle-free setup without the need for drilling. Weighing only 49.9 grams, it's easy to transport and perfect for on-the-go projects.

Specifications

Manufacturer	Granberg International
Part number	G777
Item Weight	49.9 g
Product Dimensions	60.96 x 33.02 x 10.16 cm; 49.9 g
Item model number	G777
Size	1-(Pack)
Color	Orange, Silver
Material	Steal
Item thickness	4 Inches
Power source type	Hand Powered
Horsepower	1 Kilowatts
Item Package Quantity	1
Number Of Pieces	1
Measurement System	Inch
Included components	Saw
Batteries Included?	No
Batteries Required?	No

Have a Question? See What Others Asked

Sounds like the Stihl MS180C is too weak (32cc). Would it work just for a trial run? What 20" (but not too $$$) saw is recommended?

I a saw chain b2ft-64dl .325" .058"/1.5. would it be good for the mill? are there any better choices for this job? where can i find them? thank you

Will this work with a 24" or is there a better choice?

I bought this as a gift. Can someone recommend a good chainsaw that will work well with this.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

43343₴

Duties & taxes incl.

Ukrainestore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App