ELEGOO ABS-Like 3D Printer Resin, Clear Green 1000g, High Toughness & Tensile Strength & Bend Flexibility Ideal for Industrial Components for LCD/MSLA 3D Printing

The best resin I've ever used for my printer. Great for printing D&D miniatures as it's not as brittle as other resins, meaning thin parts are less likely to snap during support removal. Very consistent and a nice colour too, though most things I've used it for get painted anyway.

bought to use with a Mars 3 4k printer, the resin cures to a nice neutral grey colour and takes paint easily, slightly flexible without being brittle which is good. its not the cheapest resin but since it works I'm not wasting too much time experimenting.using to print gaming models from 6mm scale upwards and to date have not had any issues that I didn't cause myself, on the 6th bottle of it so far

The bottle had leaked within the bag and the resin was leaking into the package and covering the bottle.The external box was fine so issue is with the bottle.

Great resin

The resin itself is strong and prints really well on my mars 2 pro, once you find the right settings (I've found elegoos recommended 2.5 to be fine but needed to increase the bottom layers time by 25% or so)Only issue I've had was one bottle was delivered with a cracked lid but this was promptly dealt with and replaced no hassle

The ABS like Resin from Elegoo is fantastic for use in the Saturn and Mars 3 resin printers. Prints are less brittle and detail's are great

Very pleased with this resin.

Used to print titan scale models for my ORK army, prints turned out great

Used for prototype work & resin was as described. Little to no shrink & color was great.

If you just want to print some figures, toys, anything like those, it's a good resin. Easy to handle, clean.I bought it for research purposes, to print some optical parts with the Elegoo Mars 3 in my Lab. I've tried siraya tech build and blu, both excellent, accurate sizes. However, I need something in white, so I can easily know whether my light-absorbing paint is done properly. I noticed some deformation and shrinkage, which is not ideal for me. So I have to go back to siraya tech build, which is super accurate, and also 'abs-like'.Considering it is easier to use, it's still a decent one. Just use the recommended setting from the manufacturer.

More resistant than water-washable resin, while still holding all the detail. Get this if you're doing miniatures.

Das Harz lässt sich super drucken. Meine Druckparameter auf dem Elegoo Saturn:- Bottom Layer 15s, 7 Layer (gibt nen Elefantenfuß, bei nem Raft aber nicht schlimm), 0,5s Resting time, 40mm/s bzw. 240mm/min lifting speed, 210-240mm/min retraction speed- Normal layer 2,5s@0,05mm bzw. 3,2s@0,1mm, 0-0,5s Resting time, 180-240mm/min lifting und retraction speedBin komplett neu im 3D Druck und hab überhaupt keine Erfahrung. Das hier waren meine ersten 4 Drucke, kein Fehldruck dabei.Das Harz sieht schon so aus dem Drucker klasse aus, mit Klarlack lackiert wird daraus aber wirklich eine Augenweide (die Miniaturen sind mit Klarlack überzogen). Zur Einordnung der Druckgrößen: Mini-Figuren max Kantenlänge vom Boxmaß 25mm, das Brandenburger Tor hingegen 170mm auf der langen Seite und nimmt damit fast die gesamte Druckfläche des Saturn ein.Der Geruch ist schon streng (im Vergleich zum Anycubic Plant-based), bleibt aber bei geschlossener Tür im Druckzimmer.Das Harz hat eine gewisse Elastizität, ist also nicht super spröde und verzeiht auch mal nen kleinen Sturz auf den Boden. Es wirkt aber trotzdem stabil. Beispiel: wenn man die Photonsters Validation Matrix druckt, bleibt die Platte schön eben, ist aber biegbar. Mit dem Anycubic plant based resin verzieht sich die gleiche Platte stärker.

Resin performed great, but I was able to score a bottle at nearly half the price that produced the same quality print.