Manton Cork Premium Cork Roll - 4' x 12' x 3/8", 100% Natural Facing Grade Material for Bulletin Boards, Decorative Photo and Message Push Pin Displays - Perfect for Home, School, and Office

Up cycled a large frame into a cork board with fabric cover. This cork came perfectly rolled in a long box. Is nice and thick and did not crumble. Flattened easily. Was able to cut easily with a scissors and staple it to back of frame with staple gun. Very good price for quality. Great big size and lots left over to repeat on smaller frames. Photo of left over cork.

I absolutely love the cork that was delivered from Minton Cork. Arrived quickly, beautiful package, and the cork was of exceptional quality. It cut well too! The instructions that were included were extremely helpful, and I loved that they included were to buy the adhesive, very helpful. I know the adhesive can be purchased online, but I am a hardware store geek and love an excuse to go to the hardware store. I would not think twice about ordering a product from Manton.

Great cork material. Came as described, nothing to note. Comes rolled up in a big tube; I rolled it out flat on the floor, put some books on it, and let it sit overnight and it was nice, flat, and workable for me the next day. I ordered the 3/8" and it seems to be the perfect thickness for thumb tacks. Cuts easily with a razor knife.

It comes in a roll and is difficult to unroll and flatten out, especially the inside of the roll that's tightly curled up. It is also thin for it's large size and tears easy if you're not careful. I glued it to the wall with 3m spray adhesive. The edges were not square with eachother and a bit wavy around the perimeter so I fixed that with some trimming using a straight edge and utility knife, finishing it up with a wood frame nailed tightly to the wall. Once I trimmed off the torn and uneven edges and added the frame the end product actually came out very nice and is very functional as a huge pin board.

I bought this to put up on an office wall to quiet some noise transfer. Followed all the directions that came with it on how to install and it looks great. It's shipped rolled up, so I laid it out on the floor and put some boxes on it to flatten it out and let it relax. It still wanted to curl, but the recommended adhesive really works. I'd definitely buy it again.

I had a conference room board size 3’ x 10’. This cork was the perfect depth at 1/2” but needed to be flattened and cut. Unfortunately it comes in a roll and doesn’t flatten easily plus is somewhat brittle. So would recommend gently rolling flat and leaving it to flatten without too much pressure. Otherwise is very nice.

Built a 3 x 6 foot framed cork board for a client and I was very pleased with this cork and its overall performance. Unroll it on a large flat surface and weight it as you do. I let it sit flat for 2 day before gluing it to my backing board.

The 1872 Butte Creek Mill in Eagle Point, Oregon is being rebuilt after having burned down leaving only 25% of the original structure. In 1973 a community bulletin board was installed and became a key way to keep up with happenings and services. Way before Facebook! I bought this cork and remade the bulletin board. Your cork is a great product and was easily rolled flat and glued down to a plywood backing.