GRG M1 M-1 M1D Garand Cleaning Kit with M10 Combo Multi Tool, Oiler and Chamber Brush

Quality product , works well. would buy again.

The cleaning rods and attachments are very sturdy and it stores neatly in the butt stock of the rifle. There are no directions on how to use it but just go on you tube and there are some informative videos

It is a really good reproduction, looks like the real one with some minor flaws that I will mention. The barrel cleaning rod works as intended, just stuff a little rag in the loop and pass it through the barrel a few times. The bore and chamber brush also work well. Just know that it will be a bit hard to put the chamber brush in the chamber because it’s new and you will need to force it out with the rod. The multi tool works well, but the hole to put a rod in to get leverage when using it as a screwdriver is too small, you will need to drill it out a bit more. I have not used the oiler, and I don’t plan too. Its purpose is obsolete now since we always have access to gun oil. But if you want it for the looks, it’s good, hold the multi tool inside the other tube and goes in the bottom hole of the stock. I had a problem with the rod pouch. It has a very bulky bottom that when all rods are in. It won’t fit in the stock hole. You will need to cut the seems in the bottom, then cut the excess cloth, and then sew it back together. The white circle on the top rod is too big and you will need to shave off and sand it down a bit for it to properly fit in the stock. You will not be able to fit everything into the stock. That is why I am not using the oiler. The way I use the space is I put the chamber brush and the multi tool into the bottom hole. Then the rod pouch into the top one. All rods, along with the bore brush, fit into the pouch. DO NOT THROW AWAY THE PLASTIC WITH THE LOOP ROD, you will need it to store the bore brush. I recommend buying the PingMic gun cleaning patches for the loop rod and to stuff into the stock holes to fill in space to prevent the tools from rattling inside.

Great cleaning kit for an M1a with a wood stock. It’s a tight fit with no room for the ratcheting tool. The pull string on the case broke on first use and needed to be reattached and reinforced for use.

fits into butt of stock so it cant get lost or misplaced

Nice reproduction

as far as i know its the way the factory made them

I bought this primarily as a back-up cleaning kit to store in my M1. I also wanted a multi-tool for the gas plug should I need one in an emergency. The cleaning rods and other parts seemed adequate for what they are, but I was hoping the multi-tool was going to be of a higher quality than what I received. The screwdriver tip at the end of the gas plug tip sheared off when I tried using it to loosen the front sling screw, which is one of the uses for which the original tool was designed.