CamcoDo It Yourself Boat Winterizing Kit (65501)

Holds 5 gallons and everything you need is in the kit. If the large cap had a gasket, the small drip when the container is moved on its side would be eliminated.

This unit works well. It is the right capacity for flush and fill of your cooling system in the fall. Simply fill it with two big jugs of antifreeze, hook up the hose to your ears and put on your leg, then hook your garden hose to the tank valve (make sure you have your valves closed) and then start to run water from hose through by pass valve into ears and leg. You run your motor and watch your thermostat. It will begin to rise as your motor runs with water running through it. In a few minutes you will see the needle in the gauge drop a few degrees (or notch) as the thermostat opens up and water begins flushing through the entire system with thermostat open. At this point you can close your by pass valve, and open the tank valve, (make sure the vent cap is open) and then watch the antifreeze flush the system. You will soon see antifreeze coming out of your leg rather than water. Once this happens I run the engine, until the tank is almost empty flushing the system well. Turn off the engine, turn off the tank valve, remove your ears and you are done. Easy Cheesy. Go have a beverage.

Does the job would recommend this product

Un peu cher, mais très pratique. Tuyau et accessoires de qualité

Everything worked really well. Made winterizing the engine on my boat painless. It doesnt come put together so you just have to make sure to set up the valves correctly to make the T, which is no problem.