DURA+ All-In-One Hybrid Polymer Adhesive and Sealant: Waterproof, Extreme High Bond Strength, Replaces Silicone, Long-Lasting & Anti-Mould, Superior For Sanitaryware (290ml - Clear)

Got this to adhere 8 x Mouse Mesh Covers to my House Walls, Outside, needed high temp and weatherproof adhesive, put them on about 2 months ago, painted over the Glue and they are still there, no issues.This Adhesive is Excellent and so easy to use, But, make sure you wear Gloves like Latex, Dish Wash gloves also because you could easily glue your fingers together, i did, but its not like superglue (did with that too) this adhesive can be washed off, eventually.

Now this stuff is greatUsed it for gluing down a loose patio slabWorked well very sturdy

Needs a lot of pressure to get the gun to force it out but once applied it sticks really solidly. I used it for replacing some UPVC trim and re-fitting a UPVC gutter end stop.

Used it to stick artificial moss to a butyl liner in the garden. So happy, bought more. Used it to fill holes around conservatory and to cover screw heads to prevent corrosion. Cures quickly enough to avoid getting into a mess when doing a lot of work.

Works well

Sealant has done the job on my water feature but was difficult to apply and needs using in one go.

This did a really good job when a ridge tile was broken during roof work. It was used to join and seal the existing tile until a new one was organised and fitted - it was a very good seal and joint adhesive. The ridge tile has not moved since it was joined 6 days ago. It is at the more expensive end of waterproof outdoor adhesives but it works well and it means the job is done once - this is my “go to adhesive” for all outside work.

I bought this to stick rubber soles to my old moccasins and it failed. I thought the problem was the uneven surface of the old shoes. I then used it to glue the same rubber soles to a pair of Ug boots for my wife. I had sanded the soles smooth to ensure a good surface but even after leaving the adhesive to cure for 24 hours the adhesive failed. The glue peeled off both surfaces very easily. I then used a spray contact adhesive which has worked perfectly. I’m not sure what I can use the rest of the tube for.