⚓ Elevate Your Boat Experience with Confidence!
The Bremas Maintained Boat Lift Switch is a robust and reliable manual switch designed for boat lift operations. With a maximum current rating of 20 amps and an operating voltage of 240 volts, this switch is built to withstand the elements with its gasket-sealed housing and IP54 rating. Its textured handle ensures a secure grip, making it user-friendly in any condition. Compact and versatile, it fits seamlessly into your boating setup.
| Operation Mode | manual |
| Current Rating | 20 Amps |
| Operating Voltage | 240 Volts |
| Contact Type | Either 'Normally Open' Or 'Normally Closed' |
| Connector Type | Screw |
| Brand | BH-USA |
| Terminal | Physical |
| Item dimensions L x W x H | 3.5 x 4.5 x 4.5 inches |
| Circuit Type | 1-way |
| Actuator Type | Rotary |
| Contact Material | Stainless Steel |
| International Protection Rating | IP54 |
| Number of Positions | 2 |
| Controller Type | Manual |
| Control Method | Touch |
| Connectivity Protocol | X-10 |
| Color | Silver & Red |
| Wattage | 4.8E+3 |
| Unit Count | 1 Count |
| Number of Items | 1 |
| Global Trade Identification Number | 00816146020761 |
| Manufacturer | BH USA |
| UPC | 816146020761 091037090140 |
| Item Package Dimensions L x W x H | 9.6 x 7.6 x 5.3 inches |
| Package Weight | 0.52 Kilograms |
| Item Dimensions LxWxH | 3.5 x 4.5 x 4.5 inches |
| Brand Name | BH-USA |
| Warranty Description | 30 Days |
| Model Name | Bremas Maintained Boat Lift Switch |
| Suggested Users | unisex-adult |
| Part Number | 09014 |
| Included Components | Bremas Maintained Boat Lift Switch, Wiring Directions |
K**N
Works great
Used to replace my 20 year old switch that was corroded. Hoping to get another 20 out of this one.
P**.
Replaced old switch
It’s was what I needed to replace the old switch and control knob
K**H
I bought this switch to replace the switches that are ...
I bought this switch to replace the switches that are on 2 old motors. Century Ace from the early 90s. At first try the switch only ran in one direction. I rewired the motor according to your suggestion in the manual. It will run in both directions now, but the motor overheats and trips the breaker. I had a boat lift company send an electrician out and after 3 hours, they gave up. Both switches, same problem on different motors. Very light weight load on lift. Called customer support and they were very helpful. Works like a champ now
R**N
Great replacement!
Memorial day weekend Friday. Boat lift went out midstream. Motor good. Must be old controller. Ordered new controller Friday at 8:00 pm. Arrived by 1:00 pm Saturday. Switched out with old controller Sunday morning. Fishing Sunday afternoon. Controller and supplied instructions excellent! Very pleased! New controller nicely made and instructions supplied more than sufficient.
G**T
Horrible design of terminals
The terminals for the wiring are impossible to use - not “difficult” but “impossible”. Some of the terminals are tucked up into the box where my fingers have a hard time reaching. Once you have either one of the provided male terminal ends or bare stranded wire in place, no matter how hard you tighten the clamp the wire falls out with a few minutes. I have found these switches (I ordered two) unusable. Money wasted.
T**Y
Connect it as the book shows. Works great
Easy to install. Used on boat lift.
M**P
As Advertised
Installed easily with good directions. There are two types of switch so make sure when ordering you confirm what you want: spring loaded (momentary) or will stay on.
D**D
No wiring diagram shipped with item
Replacement for an existing switch. Good replacement but it did not come with any information on installation. No wiring information. Had to spend hours on the internet to figure my own wiring plan.
Trustpilot
1 day ago
1 week ago
