ELEGOOStandard 3D Printer Resin, Clear Blue 1000g, 405nm Fast Curing Photopolymer Resin, Ideal for Beginners with Easy Molding for LCD/MSLA 3D Printing

I’ve not been 3D printing long and I’ve not used any other brands of resin (Yet) I’m really impress with the detail and quality of the prints. People complain about it being frothy when it’s shaken. I’ve notice this but I’ve started to blow a heat gun over the vat to pop the bubbles before I print and I’ve not had any air bubbles in my prints since.

This was the second bottle of resin I had bought since my 8k resin printer arrived.Printing parts as accessories for the plastic models I build, the detail is very nice and crisp.My only criticism is that it is very brittle, parts have snapped just from removing the tree's holding the parts.

I've just got into 3D printing and I'm finding this a good resin to use

I started off using ABS-like resin and at least half a bottle was wasted on failed prints. This stuff however has yet to fail me, has left minimal mess and surprises me every time with it's high quality finish. This is going to be my go-to resin for the forseeable future.It arrived very quickly and securely at a reasonable price. what more would you want?

Just purchased an Elegoo printer and decided to use this. The print quality is good as far as I can tell, coping with 0.025mm thickness layers on 28mm minis.I haven't used any other brands but it does have a strong odour.The bottle while sturdy is difficult to pour from and tends to drip , which is irritating but not awful.It seemed pricey for what it was but I haven't shipped too hard.Overall good but could be improved on.

Works well on exposures from 2.5 to 5 depending on what you're printing. Details are crisp and it cures well, but I would recommend washing it in water after the alcohol to prevent white deposits appearing on the model.

Never used the semi transparent resins before and this product arrived excellently packaged and intact. First use saw a print of baby yoga for a mate at about 2 inches high. Perfect adhesion to the build plate and good easy clean up. Will definitely buy this again for doing gems and crystals for 28mm figure dioramas/wargames terrain.Gonna use most of this bottle on a mandolorian figure....This is the way!

The translucent abs like resin is way too soft if compare to smoky black or other abs resin.their recommended settings can certainly keep the details but it's way too weak IMHO. The supports will not hold if your 3d object isn't flat.my test result:0.05um/layerlift speed: 60mm/min + 180mm/minlift distance: 5mm+4mmObject: a 4 gram elliptical shapeUsing auto supports from Chitubox, light supportsexposure time: 4scontact diameter: 0.3mmcontact depth: 0.2mmdensity: 100% fused together and distorted, some supports break off, resin piled upon support contact90% distorted, most supports break off, resin piled upon support contact80% all supports break off70% all supports supports break offcontact diameter: 0.2 contact depth: 0.1all supports break offexposure time: 5scontact diameter: 0.3 contact depth 0.290%: distorted, resin piled up on supports contact80%: some support breaks off, distorted, resin piled up on supports contact.70%: half supports breaks off, distorted.contact diameter 0.2 contact depth 0.190%: distorted, half supports break off, resin piled up.80% all support break off70% all supports break off.exposure time: 6scontact diameter 0.3 contact depth 0.2100％ distorted, resin piled up, unable to remove support, all support fused together90％ distorted, resin piled up80％ distorted, resin piled up70％ distorted. some resin pile up.contact diameter 0.2 contact depth 0.1100％ all supports fused together, resin piled up90％ distorted, resin piled up80％ resin piled up, some support breaks off70％ all support breaks off.best result: 6s exposure, contact diameter 0.3 contact depth 0.2, 70％ density.anything passing this point with cause more distortion on support contacts. even with less but stronger support.