DEMOTOR PERFORMANCE 5/8"-36 Spline x 3/4" Smooth Single Universal Steering Shaft U Joint- Black, Total Length 96mm (3-3/4")

This ujoint is built strong. I looked at it closely and it appears to be rebuildable. I couldn't use it for my needs due to a factory design issue with the shaft I was using. Chevy GMT400 owners, this will NOT fit the rag end of your steering shaft. Chevy necked it up under the cover and then shrunk it down to press fit the rag mount. There's no room to cut off the mount and slide this on. A full shaft replacement is your only option.

Good fitment

The shaft that sets the four-way valve for adjusting the flow to the outlet jets of my hot tub broke. Because the control panel on top and the valve inside the cabinet are offset, the shaft has universal joint. The original part is plastic, assembled and installed in 1994, and is the part that broke. I chose to replace it with a 3/4" x 3/4" stainless steel universal joint that won't break. I did have to drill a hole through each receptacle to pin the shafts in place. The new u-joint works easily as I enjoy soaking in my rejuvenated hot tub, adjusting the jets to shoot from floor, sides, and rejuvenating seat.

True stainless steel u joint with very high quality standards compared to every other producer at this cost definitely will be recommending this brand

This is very well made for the price

I used this on a steering columne to steering box. It worked for what i needed it to do because i made it work. Let me explain: Its annoying that you do not offer the size i needed. I had to machine the 3/4-36 spine intermediate shaft of my existing steering columne coupler into a Doulbe D shape on a mill so the joint fit because you do not offer this black powder coated joint in 13/16"-36 spline to 3/4"-36 spline. I really hope you offer the more polular sizes in the future. Speaking of that if i could have found the top joint 1"-48 spline to 3/4"Doulble D then i could have just connected these two joints together with a piece of Doulble D shaft and been super happy. 1"-48 spline is the GM steering columne of the 1970s. Virtually all the Chevy cars and trucks had this size. Thats why its so common. So that is why i had to take 45 min. of my time to machine my part to fit this one joint.*** In the future if you come out with that joint (the 1"-48 spline to 3/4" doulble D) let me know as i will gladley pay you the $29

made in the good ole US of A not cheap china quality. precision made...

I was able to use this to get rid of the rag joint at the Saginaw power steering box

I was expecting a far less superior part. This thing is very beafy. I am using it for a motorcycle trailer tow hitch. It fits great and will work awesome!!

Excelente calidad del producto

Thumb up

Automotive

Product used as an axle for tractor pulley