GEARWRENCH2 Piece Drive 84 Tooth Locking Flex Head Teardrop Ratchet set - 81274A-07

Great strong wrench and I like the fine 84 teeth. Works great in tight spaces.

I’m a DIY mechanic, and I wanted something with the quality of Snapon, but at a non-ridiculous price. I was tired of Husky and Craftsman garbage from local hardware stores. These nailed it. The turning action is incredibly smooth. The fed/rev switch works every time. The weight and quality is just right. My friend with all the pro tools was annoyed with how good these were, especially the large 1/2” ratchet. It took the axle nut off my minivan without the usual need for a breaker bar.The flex heads are helpful in tight engine spaces, but not too loose to be annoying like others I’ve used.Well done Gearwrench. You nailed the price performance on these fantastic ratchets. I included the picture with tape measure to help give a good sense of size.

Came sooner than I expected works almost as good as my matco one that cost twice as much

Nice and useful

I recently used all but the stubby ratchets on a recent automotive project. I put about 240 lbs of torque on the 1/2 driver and about 150 lbs of torque on the 3/8 driver. I used them at different angles and experienced no flex, slippage nor cracks or breakage! The bottom line is, these are totally worth the price! I wouldn't go so far to compare these to SnapOn however, definitely comparable to Craftsman! If you're a DIY'er and plan to use these tools occasionally (not every day like a professional mechanic) then I think they'll last at least one lifetime.

A most excellent set of ratchets for a most excellent price. Nearly equivalent to Snap-On products, in my opinion. Got these over the 120 tooth version because the heads are just slightly thinner, and I honestly have never needed/wanted that many teeth.Updated:After owning this set for a number of years and subjecting them to daily use in an automotive repair shop, the long-handled 3/8" ratchet and the 1/4" ratchet have both chewed up their internal gearing. The 3/8" ratchet lasted a LOT longer than I expected, and got the most abuse of any of them. The 1/4" crapped out the fastest, and I ended up replacing it with an equivalent Snap-On product which in my opinion has an inferior design to the Gearwrench (thicker head, shorter handle, swivel head doesn't lock into place), although it does seem to have better build quality. For the price point they're still excellent, and even tool-truck brand ratchets fail eventually. I'll be seeking a warranty replacement on both tools as I have several local retailers who supposedly provide support for them.Just keep in mind that ANY PRODUCT is going to break eventually, no matter how well built. It's not a matter of if, but when.

I love how it feel in my hand and it works great. I love it.

This ratchet set is well worth purchasing. I'm a professional technician at an automotive dealership and I've been using these ratchets for several months now. They've held up great and would highly recommend these to anyone in the market for a new ratchet set. I bought virtually the same ratchet from Snap-On, except it has a flex-head with a speed-handle for those who know of them, at $129.00. Granted this set does not have a speed handle it is four ratchets to one at the same price, and Gearwrench is no slouch when making tools. The stubby 3/8" drive is great for tight spaces and running up bolts to the head before torquing them down and the long handled 1/2" is great when you need the extra torque. Again, I highly recommend this set.

Très mince comparativement à d autre marque. Plusieurs dents, pratique, pour endroit exigüe. Long manche pour plus de puissance.

👍👍

Buen producto.

Nice ratchets ! The 3/8" ratchets has quite a long handle but has smooth action !

Una marca muy reconocida por profesionales del sector. Mas barata que snap on y con una clalidad muy muy similar por no decir igual. Cumple de sobra tanto para uso profesional como para cualquier aficionado a la mecanica