WPCTEV Window Film One Way Mirror Film Daytime Privacy Static Non-Adhesive Decorative Heat Control Anti UV Window Tint for Home and Office, Silver 35.4" x 78.7"

It will work good but need a professional people to fix it to avoid leaving bubbles on you window. And I recommend the transparent color in case you need to reserve same lighting strength in your area but if not you can choose the blue color.

The item I received was completely different to what was advertised. Very poor quality also. It came without any instructions or labels, wrapped in plastic wrap only.

Where is the peel off nothing no two layers as per the picture It is rip off, I was supplied with a silver gift wrapping paper and that's all it was easily scratched and would not in any manner stick to the glass even with water or soap

Se buscaba bloquear la luz solar y reducir la temperatura en casa con ventanales muy grandes, realicé una prueba y creo que sirve mejor con ventanas medianas o pequeñas, no con ventanales, pues disminuye significativamente la visibilidad hacia afuera, se ve borroso, y nulifica la estética y funcionalidad de los ventanales, decidí mejor utilizar persianas de hojas verticales de PVC, que blinda auténticamente la luz solar y sí reduce el calor al interior.

This product has given me my life within my home back. I can not tolerate UV rays and lived in the dark. I used double the cover on all my windows but you don't need it unless you are me. :)

DISCLAIMER: I hate what Jeff Bezos is doing to the safety & well-being of his workers and if I lived anywhere with physical stores that stocked supplies like this I’d be thrilled to put money ANYWHERE else. But for those of us in rural areas who need to know about a low-cost product to keep energy costs low, here you go.AFFECT ON TEMP:My kitchen windows are single-pane non-UV glass and it reaches 120°F at the worst point in summers. I’ve applied several window film types in the past elsewhere (anti-shatter, holographic, etc) and this film is by far the easiest to apply. The temperature difference in the kitchen feels like at least 8-10° after covering the windows.AFFECT ON VIEWS/LIGHT:I’m an artist and hyper-specific about color and would hate this if it threw a weird tone onto everything. I got the silver kind, and while it does block a ton of heat, it does not block too much light. There is a slight blue-ish tone to the sunlight compared to before, but it’s calming and doesn’t look fake or fluorescent-like.APPLICATION:1) Clean your windows multiple times with both vinegar solution and 50/50 rubbing alcohol and water. Think lab-level clean. It really helps.2) To apply large pieces, use two people. The only annoying thing about this material is that you can crease or put half-moon shape dents in it when unrolling, so it really helps to have a partner or buy extra. Cut to about an inch large on each side but not more.3) You can use 2 pieces of painters tape on top to hold the piece on, and then peel the inside film off with the window film hanging in position.4) spray on a lot of barely-soapy water to both the inside of the film AND the window (like half a squirt/tsp of soap in an entire spray bottle)5) use a rubber squeegee (not included) or a plastic ruler with the edge covered in painters tape to prevent scratching (like I did) to squeegee out bubbles from top to bottom and outwards from the middle towards each side.Pro tip: bumpy terrible windows like my multiple paned ones will likely have remaining bubbles on the sides and that is the fault of the glass, not the film. It’s fine. Perfection is an impossible goal.As for the nice window on the door, that one came out pretty close. One or two tiny half moon dents.Highly recommend, sadly even with the consequences of supporting this late-stage-capitalism death-eater in the process.

I'm very impressed with this product. I installed the film over two large (70" x 30") patio doors by myself. I did a few tricks to make it possible to do it with one person. I also spent about 3 times longer on the prep than on the actual installation. (Here's what I did from start to finish: Cleaned the windows and surrounding area to ensure no dust. Cut the film to oversize, duct-taped it in place on the top of the window frame. Peeled off the backing. Used tons and tons of very slightly soapy water for the initial adhere. Put the peeled backing back onto the inside of the film for protection using lots more soapy water. Did a rough burnish with a rubber squeegee. Did a fine burnish with a burnisher. Did a rough cut of all the extra. Did a fine cut with X-acto knife and straight edge. Did a final fine burnish.) The final install is flawless - no bubbles, no distortion, good adherence. I got the silver film because I didn't want to lose too much light. You do lose some light, but the daytime privacy and lack of distortion is impressive!

رائع