Universal Handgun Sight Pusher Tool for 1911, Glock, Shield, Sig and Others, Sight Bead Disassembly Tool with Optional Tapered/Square Slider for Glock 19 43 Sig P365(Red)

Works as advertised and great price. I recommend using it with a vice to secure the tool. Easy set up and removed the rear sight off of a glock within minutes. Very easy and basic to use. Appears durable and tight tolerance.

It’s incredibly cheaply made doesn’t work very well. There’s so much flex in the material that it bows causing it to slip. A complete waste of time.

This tool is very cost efficient and gets the job done. However I would recommend you to use some kinda of padding between the silver pusher and your sights. Because it will scratch up your sights. Apart from that like I mentioned it gets the job done and beats banging on your firearm with a hammer and a plastic/wood punch.

Used to push the rear sight off my Kimber Custom II and installed a mounting plate for a red dor. Was able to do it correctly despite having no experience - Note - Use of a vise to hold the pusher is pretty much a must. You need to know what your doing or this will probably cause you a head ache.Alot of reviews are saying this sight pusher was hard to use and I can see why they say that but it works well if you know what you're doing. It comes with a bottom plate which my guess is to seat your slide on top of it but its technically pointless unless your slide is basically the same size as it.1 star off of it as the sight pusher block doesn't sit flush with the top cross bar and it ends up canted when you're lining it up, so you have to be careful to line it up well so you don't accidentally push into your dovetail.

I bought the tapered one to install TruGlo sights on my gen3 g19. If you are patient and thorough, the press will get the job done no issue at all. Also, even though I bought the tapered one, I was able to flip around the pushing block to use the square side of it too. Not a professional grade product, but if you're like me just using it for a once and done sights upgrade, you'll be happy saving some $. Can't complain.

This product is too small. When pushing the sight onto my pistol I had to push it in almost halfway before this would even get close to pushing the sight anymore. It also cut into my sight so the sides of my back sight are cut up and smashed. Don't recommend and sent mine back.

great budget option for a cheapskate like me. It worked good on my Sar b6 that I had to remove my rear dovetail sight to install an optional factory red dot mount. Now if you read the other reviews then you know you need to apply some light oil on all threads and also any touching and/or moving surfaces make sure and take your time...t's not a race. Check often after about every half to full turn to make sure there's no twisting and binding or contact with your slide you don't want. And finally, I recommend a good pair of locking pliers (vise grips). Good luck, hope this helps you!

This is the best sight because it has a grove at the bottom of the sight pusher. Put it in a vice and its the easiest functional sight pusher I've ever used. without the vice it will still work great because of the grove in the sight pusher. I also like that you use a ratchet. 17 mm socket works best.