TCP GlobalAutomotive Paint Gun Auto Car HVLP Spray Gun - 2.0mm Fluid Tip Gravity Feed Paint Gun, Sprayers with Cups, Air Regulator for Primer, Topcoat & Touch-Up Painting Pistola para Pintar Carros

I bought this along with a 2.5 of the same model to spray Autobody polyester primer. Both guns work amazing! I also build and finish cabinets and other woodworking projects, spraying nitrocellulose lacquer. Just for fun I thought I would try these on some cabinets I was spraying the other day. They worked amazing! For the price you cannot go wrong. I read a review on these guns where the guy writes, stated that he just throws the guns away when he's done spraying. That is insane!!! I don't care how cheap it is, we have to think about the wonderful workers that build these guns, putting their pride of quality into assembly and final testing. Throwing this gun away is downright disrespectful, especially when it cleans up so easily. I've sprayed multiple gallons through these guns while my Iwata guns and Sata guns are hanging on the gun hangers. I continue to use these even though they are a fraction of the cost of my regular paint guns. Its fun to see how well they spray job after job, making me more and more money, all the while thinking about the dude that thought it was cool just to throw it away after one job.....insane!Buy it, care for it by taking apart to clean it, only takes about 5 minutes to do a good cleaning. You will not be sorry and you'll still be using it next year holding a bunch of extra cash in your pocket.Note: make sure to purchase the proper fluid tip and needle size for the product that you will be spraying. I bought the 2.0 and the 2.5 because I originally purchased these for polyester primer. The 2.0 works great for nitrocellulose lacquer but if I tried to paint a car with this setup, would not be a good thing.If you need a beginner gun to shoot automotive base-coat and clear coat, buy the 1.3 tip size for your starter gun. Turn the volume screw all the way in, back it out about 2-3 turns, open the fan pattern screw all the way out until the fan is at its widest pattern. Now turn it in just a little bit, while spraying cleaning solvent through it so you can watch the pattern, turning the fan knob in until you see it just start to narrow, this is where you want your fan pattern for normal spraying.Now go practice on an old fender or something like that. Keep the gun cap about 6 inches off the panel, use a 70% overlap of the fan pattern while adjusting your speed of movement to compensate for the amount of flow coming out of the tip and the amount of overlap you're using. If you feel you're not getting enough paint or clear coming out of the gun,open the fluid knob a 1/4 turn at a timeuntil you get the volume where it works best for you. Remember, if the gun is too far off the panel, you will never succeed. The tips for success is: close in,(about 6 inches), tight overlap, (about 70%), adjust the speed of movement to achieve the finish you're looking for. Practice, Practice, Practice!Before you know it, even with this inexpensive spray gun, you can be laying down a finish to be proud of.Have fun!

My new TCP Global HVLP spray gun with 2mm tip does a great job on slightly thinned latex and oil paints. My older gun was fine for lacquer and thinned varnish, but tended to clog with thicker material. I've used the new sprayer with primers and finish coats, getting even coverage and good results when dry. The small tubular filter at the top of the gun assembly traps solids that might escape my mesh strainer. Controls are precise and the gun is nicely finished. The available fluid tip sizes should be helpful for spraying a variety of materials. I will use the spray gun a few days a month for home projects, mainly painting doors and long sections of wood trim. Great value.

I needed new spray guys for spraying automotive primer, paint and clear coats.Took a chance on these guns and what I’ve found is:The paint gun, regardless of a 1.3, 1.4, 1.5, 1.8, or 2.0 in my case MUST be completely torn down, stripped and cleaned before even thinking of using.There is some sort of thread sealant on the portion of the brass part of the nozzle of the gun, and it’s truly a pain to clean this out.I have found remnants of metal from when the tips were machined on at least 3 of the 5 spray guns I purchased.After dialing in the guns, I found the 1.3 is fantastic for spraying clear coat.The 1.4 and 1.5 guns are great for base coat materials.My 2.0 gun got blocked up from trying to spray a 0.015 metalflake, however I had too much flake in my intercoat which settled and clogged the gun up.Overall, these guns do their job decently well and for a guy wanting to spray stuff, they will do the job.Only gripe I had was the 1.4 was out of stock, so I bought a second 1.3 gun and a 1.4 tip kit, and just swapped out.Color coding on some of the gun parts makes it nice to ID a clear, base coat or primer gun to keep things separate especially when doing multiple colors on custom work.Decent spray guns for the money. Make sure to clean before use!

works great for primer

I use this for primer only and it has performed really well so far for the cost.

Is not terrible however, I was expecting the paint container to last more than 1 refill before it started leaking paint at the base. (Dispenser not gun) The trigger works but, it got some parts that came off from the base as well.I barely paint anything so I lost the window to return it.Other than that the rest of the gun works just fine.

Too many quality problems. First, It was sent in the original packaging not meant for shipping: the spray gun was poking through the box when I received it. Then there were metallic particles in the openings and there was some gunk in the nozzle. i clean up everything but the spray gun was never able to spray an acceptable mist and as soon as i opened the fan, it would not be able to spray at all. I switched back to my Husky 1.8 spray gun and everything went back to normal. I returned this one.

I bought my "TCP Global Professional Gravity Feed HVLP Spray Gun with a 2.0mm Fluid Tip, 1 Liter Aluminum Cup and Air Regulator" because I was tired of having to buy a gun for each size nozzle. You can change nozzle sizes in airless paint sprayers why not HVLP guns. TCI Global sells other size nozzle kits that will fit this gun. I bought a "TCP Global 2.5 Needle,Nozzle, Air Cap Set for The G6600 Series Spray Gun" and it works great in this gun. I just wish the would sell the guns with multiple size nozzles.

arrived on time. Works as good as a 300 dollar gun