Specialty spill control hands-in-bag atmospheric chamber. 2 hands; medium. How to use Hands-In-Bag: 1. Unfold and spread out the "Hands-In-Bag" with the open end toward you. 2. Snip one purging tube opening and insert the gas line from the gas cylinder through the purging tube. Seal the purging tube to the gas line with tape. 3. Load the "Hands-In-Bag" with whatever equipment you may need to perform the given task. If using an electrical cord, place the cord through the additional purging tube and seal the purging tube to the cord. If you use a microscope, cut a port to accommodate the optical piece. Seal with tape. Purge to eliminate room atmosphere. Use pressure regulator. 4. With "Hands-In-Bag" loaded and purged, seal the chamber using the special tape provided. Remove protective backing from tape. Turn back tape ½ inch from each end and adhere to work surface. Place the chamber opening over onehalf of the width of the tape. Fold remaining half of the tape over the top half of the "Hands-In-Bag" opening. Starting from the center, press firmly, being sure to seal the chamber completely. Tape should extend approximately 2 inches beyond sides of the chamber opening. 5. Do not over-inflate "Hands-In-Bag". If you only inflate enough to maintain a billowed shape, it is much easier to do your work. 6. Insert hands in gloves and begin work. 7. "Hands-In-Bag" is designed to fit most laboratory hoods or other controlled systems. Do not use for handling toxic materials except in a hood or other controlled systems to prevent and protect against exposure resulting from leakage. 8. When your work is completed, fold and store your "Hands-In-Bag" for future use. If your "Hands-In- Bag" is contaminated, dispose of it as required. Warning: Do not use for handling toxic materials except in a hood or other controlled system to prevent and protect against exposure resulting from leakage. Opening size: 24". Chamber size: 14". Measures 48" length by 39" width.
A**N
Nice product, though I wish the gloves were smaller.
Great product, good delivery. I do wish the PE bag's gloves were smaller, but I've found a work-around:Before I seal the bag, I place two latex disposable gloves inside. The latex gloves are one size larger than I normally wear.Once the bag is sealed up, I place my hands inside the bag's gloves, then wear the latex gloves over those.The latex gloves thus hold together all the excess PE material to form-fit my fingers better and improve my dexterity.
G**7
Great product
Product worked as described. I mainly use it as a still air box for doing inoculations in, and I have had great success with the product. It is a great alternative to buying a glove box if you are on a budget and do not want to do a diy still air box.
T**D
Great buy
Great buy
Trustpilot
1 day ago
3 weeks ago
